post #11 of 11
1. When the switch is down (off), the GROUND and ACC terminals make contact.
2. When the switch is up (on), the POWER and ACC terminals make contact, and the POWER and GROUND pass voltage through the LED.

For some reason, my switches will turn on whatever is connected to the ACC terminal, but will not illuminate the LED. If I disconnect the ACC terminal, the LED lights up. Frustrating.

I also noticed the harness passes both the 5VDC and 12VDC from molex to molex, but it's the GROUND that actually passes through the switch to complete the circuit to turn on/off whatever is connected to the molex. Don't know if that makes a difference.
Edited by deafmetal - 4/17/11 at 9:02pm
DMI Racing Inc
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-7820X SL@4.6 ASUS Rampage VI Apex NVIDIA Titan X Pascal 32Gb G.Skill DDR4-4000 
Hard DriveOptical DriveCoolingOS
Samsung 960 EVO @ CPU DIMM.2 Plextor 810 SATA Dual loop, EKWBs, MCP655s & 480 push/pull rads. Win10 Pro x64 
MonitorPowerCase
Dell S2716DG x 3 Antec HCP-1200 MM U2-UFO + Pedestal 24 
  hide details  
Reply
DMI Racing Inc
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-7820X SL@4.6 ASUS Rampage VI Apex NVIDIA Titan X Pascal 32Gb G.Skill DDR4-4000 
Hard DriveOptical DriveCoolingOS
Samsung 960 EVO @ CPU DIMM.2 Plextor 810 SATA Dual loop, EKWBs, MCP655s & 480 push/pull rads. Win10 Pro x64 
MonitorPowerCase
Dell S2716DG x 3 Antec HCP-1200 MM U2-UFO + Pedestal 24 
  hide details  
Reply