Originally Posted by dixson01974
A-DATA is a ram company and it was an example. That kit you have and the one you are looking at will work fine together.
You can try 1.4v or just run prine95 on the 2600 for about 4 hours. If you want something fast then prime95 then use linX for 25 time/runs.
Oh, ok, haven't heard of that company before.
I tried 1.4 but failed within 3 minutes. I'm now 20 minutes into testing and no errors at 1.425.
I'm currently under Ubuntu Linux 11.04 and therefore can't use linX. I'll see if I can get another linpack tool to use.
Will test current config for +4 hours and post the results.
One last question (I know I've asked many): going from CPU/NB voltage at 1.35v to 1.425v didn't seem to have affected my CPU temperature (currently at 55ÂºC). Expected or bad readings?