Overclock.net › Forums › Intel › Intel - General › New Sandybridge Build BSODs!! HALP!!
New Posts  All Forums:Forum Nav:

New Sandybridge Build BSODs!! HALP!!

post #1 of 13
Thread Starter 
Anyone else ever have this problem? This is what Im getting. I know that Etron are the makers of the 3.0 ports or whatever. I tried to reinstall the drivers but that didnt help.. Whatever I have plugged into the 3.0 ports will eventually become unresponsive. Any ideas?

ead20d4f.jpg
Edited by TurboRotary - 4/1/11 at 10:42am
post #2 of 13
re-install all of your mobo drivers? My friend said that is what fixed his laptop BSOD's with that problem but were talking about a motherboard here.
post #3 of 13
Driver_IRLQL is a driver related BSOD, I've dealt with it before. It's usually graphics drivers that cause it, but if your issue is 3.0 ports stop responding I recommend you reinstall your USB 3.0 drivers from the disk that came with the mobo (chipset CD).
post #4 of 13
Thread Starter 
I have the latest driver installed for my graphics card. I had that card and my HDDs on another system working fine.. The only thing that's changed is the motherboard, RAM, and PSU.
post #5 of 13
Thread Starter 
Quote:
Originally Posted by E-Peen;12932548 
Driver_IRLQL is a driver related BSOD, I've dealt with it before. It's usually graphics drivers that cause it, but if your issue is 3.0 ports stop responding I recommend you reinstall your USB 3.0 drivers from the disk that came with the mobo (chipset CD).

I tried installing ones from the Etron website. That didn't solve my problem though. I will try reinstalling from the motherboard disk.
post #6 of 13
Let me know how it goes smile.gif
post #7 of 13
Thread Starter 
I replaced the driver.. Still got a BSOD. I did notice in the BIOS that there is an option for USB 3.0 Legacy that was disabled. I dont know if that will help but I enabled it. We shall see.
post #8 of 13
Thread Starter 
I also noticed this in Event Viewer.

\??\C:\Windows\SysWow64\drivers\io.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.

The following boot-start or system-start driver(s) failed to load:
AsrHidFilter

Those are the only errors Im getting so far
post #9 of 13
Thread Starter 
Just a FYI enabling Legacy USB 3.0 seems to have corrected the problem! No BSODs for several hours now!
post #10 of 13
Thread Starter 
Well damn.. They are still happening.. Here are some dump files.. Any help is greatly appreciated!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › New Sandybridge Build BSODs!! HALP!!