Here is my latest update. Any comments please feel free.
This is what I used to do the small lettering through out my mod.
Here are the 3.5 Drive Bays completed,
The 5.5 Drive Bay Tool-less buttons.
A larger view.
Here is the Front IO Panel lettering. It looks much better then just the indented black.
Top view, you can see the top buttons better here,
Well since I looked at it, I needed to do the same as I did to the front bezel, to continue the effect.. So off to taping again.
Getting ready for action
Of course I needed coffee while I'm doing this.
Here is how the IO panel came out.
With the power button in.
Sanding down some thumbscrews to prepare for painting. And yes that is the mesh from the side panel.
A few coats lightly sprayed. (I forgot to take of a pic of it being primed...ah well it was a gray beforehand)
I just like this picture.
Even the backside had to be done.
All done. Waiting on their entrance to the case later on.
Before with stock thumbscrews. (yes I know it is dirty, it is still outside in my work area)
After...looks better..need to get a better pic still.
Making something for the inside of the case....Ill show more later when Im closer to being done with it.
And finally a look at the semi- finished pieces. A few touch ups here and there...it might look close, but there is still plenty more to do...I have like 2 pages of things I'm still trying to finish.
Hope you all enjoyed it, more to come!!
* This Worklog post was generated using WorklogCreator - Version: 184.108.40.206
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip