Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Will this ssd be ready to go?
New Posts  All Forums:Forum Nav:

Will this ssd be ready to go?

post #1 of 2
Thread Starter 
I ordered this drive and will install a fresh copy of 7 x64 to it.

Do I need to check it's firmware for the latest version, or will it be ready to go?

I'm in the process of reading the stickies on ssds; thanks to all who have contributed to those.

The mobo is already set to AHCI. Is there anything else I need to look out for? Anything else I need to do during or just after the initial setup?
    
CPUMotherboardGraphicsRAM
2600K @ 4.7(1.416v load) Gigabyte P67 UD4 Diamond HD 7970 1250/1800 4 x 4GB Mushkin Blackline 1.35v 
Hard DriveOSMonitorPower
830 256GB & (3) Spinpoint F3's win7 x64 LG W2363D-PF Silverstone DA800 
Case
FT-02B 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2600K @ 4.7(1.416v load) Gigabyte P67 UD4 Diamond HD 7970 1250/1800 4 x 4GB Mushkin Blackline 1.35v 
Hard DriveOSMonitorPower
830 256GB & (3) Spinpoint F3's win7 x64 LG W2363D-PF Silverstone DA800 
Case
FT-02B 
  hide details  
Reply
post #2 of 2
should be ready to go, windows 7 will align the partitions for you... just remove any other drives you have while installing windows 7 to your ssd, mine installed the boot media to my hdd and rest to ssd which was weird
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Will this ssd be ready to go?