Overclock.net › Forums › Intel › Intel Motherboards › b3 boards
New Posts  All Forums:Forum Nav:

b3 boards

post #1 of 3
Thread Starter 
hi guys did you overclock temps go up when you switched to the b3 boards.
on my old asus p67 deluxe i could d0 5 ghz @ 1.43v and temps with prime 66 full load for 8 hours.
on my new b3 i need 1.44v but i ran prime 95 for 1 hour i hit 81c full load.
i don,t think it my cpu water block mount. i allways put the same amount on
this chip a small grian of rice and i am using m-max 4.
running the 1504 bios the board came with 1401 what is werd cuss i read that the b3 boards came with the 1502 bios.
post #2 of 3
Maybe you got a bad seat on the CPU with the cooler.
An extra .01V won't add almost 20C.
post #3 of 3
Thread Starter 
i just rest my cpu block 5 times . but i found the problem one of my fans for my cpu rad
is not working my center one,
after all of that. ha ha
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › b3 boards