Overclock.net › Forums › Intel › Intel CPUs › Asus P8P67 Pro + i5 2500K + OC = Reset
New Posts  All Forums:Forum Nav:

Asus P8P67 Pro + i5 2500K + OC = Reset

post #1 of 10
Thread Starter 
Hi, this is my first post so I will make my points as clear as possible smile.gif

I have just built myself a new rig (my first full build)

*Specs will appear below my post I'm hoping*

My problem is, that if I use the ASUS BIOS and allow it to automatically OC the CPU itself, the PC boots and then after around 5 seconds shuts down immediatley. It sometimes does this twice after I've applied the "OC tuner" and hit "Save and Reset"

Then after multiple boot ups and shut downs I get it back into the BIOS to verify that it has OC'ed but everything has reset back to Default.

I have followed the 'famous' guide on BitTech on OC'ing the i5 2500K with the exact same motherboard but I still get this boot error.


I thought maybe it could be the RAM, and it not being able to change accordingly after the CPU has been OC'ed. (I could be completley wrong, Im sure you will tell me if I am!)


So, my question is, has anybody else had this problem and/or know what might be causing it?

This is my first time attempting an overclock, but I'm not completley clueless (I've messed around in the BIOS before but never attempted to change any CPU specs)


So, any ideas?

Thanks in advance and I'll provide more detailed hardware specs if necessary!
Edited by JayMeHD - 4/10/11 at 3:42pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
post #2 of 10
This sounds like the Cold Boot problem. I have the M version of this board. I would advise not to use the auto OC in the BIOS nor in AI Suite 2. I dont know if this board has the TPU chip, but if it does, leave it off.
VIRUSi7k
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3930k @ 4.7GHz Asus x79 Sabertooth EVGA GTX Titan SC SLI Corsair Vengence 4x4GB DDR3-1600 
Hard DriveOptical DriveCoolingOS
Samsung SSD 840 Evo LG Bluray Burner Swiftech H320 Windows 8.1 Pro x64 
MonitorMonitorKeyboardPower
3x ASUS VG248QE Acer T232HL Logitech G110 Corsair AX1200 
CaseMouseMouse PadAudio
Corsair 750D Logitech G500 Neon Genesis Evangelion Logitech Z-906 
Audio
ASUS Xonar DX 
  hide details  
Reply
VIRUSi7k
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-3930k @ 4.7GHz Asus x79 Sabertooth EVGA GTX Titan SC SLI Corsair Vengence 4x4GB DDR3-1600 
Hard DriveOptical DriveCoolingOS
Samsung SSD 840 Evo LG Bluray Burner Swiftech H320 Windows 8.1 Pro x64 
MonitorMonitorKeyboardPower
3x ASUS VG248QE Acer T232HL Logitech G110 Corsair AX1200 
CaseMouseMouse PadAudio
Corsair 750D Logitech G500 Neon Genesis Evangelion Logitech Z-906 
Audio
ASUS Xonar DX 
  hide details  
Reply
post #3 of 10
Quote:
Originally Posted by virus86;13076372 
This sounds like the Cold Boot problem. I have the M version of this board. I would advise not to use the auto OC in the BIOS nor in AI Suite 2. I dont know if this board has the TPU chip, but if it does, leave it off.

Exactly this - don't use OC tuner.

When i tried it it did exactly what you just described (booted then shut down then booted).

It's a good old load of nonsense anyway; it's better/safer to overclock manually.
space heater
(29 items)
 
S-HVH-01
(11 items)
 
PfSense
(5 items)
 
CPUMotherboardGraphicsRAM
Intel 2500k 4.7GHz  Asus P8P67 Pro(B3) 2 x Club3D 280X 3GB 16GB g.skill 1600MHz C9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro 256GB 4 x 2TB Barracudas in RAID10 2 x WD Blue 1TB RAID0 2 x 3TB Seagate Barracuda 
Hard DriveHard DriveOptical DriveCooling
8 x 146GB HP 10k SAS - various RAID levels RAID Controller LSI 9260-8i 512MB LiteOn IHAS124 Noctua NH-D15 
OSMonitorMonitorMonitor
8.1 Enterprise Acer GD245HQ (120hz) LG W2420P LG IPS231P 
MonitorMonitorKeyboardPower
HP ZR24w LG 32LH3000 (w/IPS) Razer Blackwidow Antec TruePower New 750W 
CaseMouseAudioAudio
Corsair 750D Modified original G5 Asus Xonar PCIe Sennheiser HD595 
AudioAudioAudioAudio
Tannoy Mercury 5 NAD C165BEE Bowers & Wilkins 683 Cambridge Audio DACMagic+ 
CPUCPUMotherboardRAM
Intel® Xeon® Processor E5-2630 v3 (20M Cache, 2... Intel® Xeon® Processor E5-2630 v3 (20M Cache, 2... Lenovo RD650 128GB DDR4 ECC REG 
Hard DriveHard DriveHard DriveHard Drive
720ix 12Gbps SAS RAID Controller with 1GB FBWC RAID 0 - 2 x Intel S3500 120GB SSD (deduped VHD... Intel 530 120GB SSD RAID 10 - 8 x Seagate 146GB 10k SAS  
OSPowerCase
Windows Hyper-V Server 2012 R2 2 x LiteION 750W 80PLUS Platinum RD650 24x2.5" chassis 
CPURAMHard DriveOS
Intel® Xeon® Processor X5650  8GB ECC 2 x 146GB SCSI RAID1 PfSense 2.2b 
Other
Intel 4 x 1GbE 
  hide details  
Reply
space heater
(29 items)
 
S-HVH-01
(11 items)
 
PfSense
(5 items)
 
CPUMotherboardGraphicsRAM
Intel 2500k 4.7GHz  Asus P8P67 Pro(B3) 2 x Club3D 280X 3GB 16GB g.skill 1600MHz C9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro 256GB 4 x 2TB Barracudas in RAID10 2 x WD Blue 1TB RAID0 2 x 3TB Seagate Barracuda 
Hard DriveHard DriveOptical DriveCooling
8 x 146GB HP 10k SAS - various RAID levels RAID Controller LSI 9260-8i 512MB LiteOn IHAS124 Noctua NH-D15 
OSMonitorMonitorMonitor
8.1 Enterprise Acer GD245HQ (120hz) LG W2420P LG IPS231P 
MonitorMonitorKeyboardPower
HP ZR24w LG 32LH3000 (w/IPS) Razer Blackwidow Antec TruePower New 750W 
CaseMouseAudioAudio
Corsair 750D Modified original G5 Asus Xonar PCIe Sennheiser HD595 
AudioAudioAudioAudio
Tannoy Mercury 5 NAD C165BEE Bowers & Wilkins 683 Cambridge Audio DACMagic+ 
CPUCPUMotherboardRAM
Intel® Xeon® Processor E5-2630 v3 (20M Cache, 2... Intel® Xeon® Processor E5-2630 v3 (20M Cache, 2... Lenovo RD650 128GB DDR4 ECC REG 
Hard DriveHard DriveHard DriveHard Drive
720ix 12Gbps SAS RAID Controller with 1GB FBWC RAID 0 - 2 x Intel S3500 120GB SSD (deduped VHD... Intel 530 120GB SSD RAID 10 - 8 x Seagate 146GB 10k SAS  
OSPowerCase
Windows Hyper-V Server 2012 R2 2 x LiteION 750W 80PLUS Platinum RD650 24x2.5" chassis 
CPURAMHard DriveOS
Intel® Xeon® Processor X5650  8GB ECC 2 x 146GB SCSI RAID1 PfSense 2.2b 
Other
Intel 4 x 1GbE 
  hide details  
Reply
post #4 of 10
Thread Starter 
Quote:
Originally Posted by fluxlite;13076398 
Exactly this - don't use OC tuner.

When i tried it it did exactly what you just described (booted then shut down then booted).

It's a good old load of nonsense anyway; it's better/safer to overclock manually.


I've tried OC'ing manually using the guide by bit-tech but it still does the same.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
post #5 of 10
Hmm...
First update to the latest available bios or beta bios poted in the thread for that board.

Then, clear cmos using the jumper, per the manual instructions, or using the onboard cmos button if available. Have the power supply turned off completely when clearing cmos.

Then set up your new settings and try setting RAM timings manually. In fact its probably best to set everything manually instead of auto.

You can try 1.65 or 1.5v for the RAM, 1.05 for VTT, 1.05 for PCH, loadline calibration at very high. Keep system agent at auto. Disable C1E, C3 and C6 for now; goal is to get a stable overclock. And you can also try setting power on by PCIE to enabled in the power options. Then set your cpu vcore and multiplier. Set CPU PLL to 1.8v. Keep CPU PLL Overvoltage to disabled unless you're pushing a very high multiplier (usually over x45).

I don't know about "additonal turbo voltage" or what that is for.

Hope this gets you up and running.
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
post #6 of 10
Thread Starter 
Quote:
Originally Posted by Falkentyne;13077025 
Hmm...
First update to the latest available bios or beta bios poted in the thread for that board.

Then, clear cmos using the jumper, per the manual instructions, or using the onboard cmos button if available. Have the power supply turned off completely when clearing cmos.

Then set up your new settings and try setting RAM timings manually. In fact its probably best to set everything manually instead of auto.

You can try 1.65 or 1.5v for the RAM, 1.05 for VTT, 1.05 for PCH, loadline calibration at very high. Keep system agent at auto. Disable C1E, C3 and C6 for now; goal is to get a stable overclock. And you can also try setting power on by PCIE to enabled in the power options. Then set your cpu vcore and multiplier. Set CPU PLL to 1.8v. Keep CPU PLL Overvoltage to disabled unless you're pushing a very high multiplier (usually over x45).

I don't know about "additonal turbo voltage" or what that is for.

Hope this gets you up and running.

Ok thanks for the reply. I'm at college atm so I will clear the CMOS when I get home and try these settings. Cheers thinking.gif
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
post #7 of 10
Thread Starter 
Quote:
Originally Posted by JayMeHD;13081543 
Ok thanks for the reply. I'm at college atm so I will clear the CMOS when I get home and try these settings. Cheers thinking.gif

First off sorry for double post, need to bump.


Tried those settings and I'm still getting the same (although with no double resets)

I cleared the CMOS and followed your guide but still to no avail.


The BIOS registers that I want to change the clock speeds and displays the target speeds after Ive changed them, then I save & reset and it loads as if it has just ignored what I've "told" it to do.

The settings are all the same, it just doesn't apply them.


Could this be a physical MOBO problem or do you think it is something else?


Also in the options, wherever a "Turbo Mode" is displayed the option to Enable/Disable is dimmed out (unselectable)


BIOS Version: 1502




I will be bald by the time this is solved confused.gif


EDIT: I've reset all options to Auto and the Turbo Mode/s are now selectable and all enabled by default.
EDIT2: My CPU is idling at 48c on the MOBO temp indicator, is that about normal?
Edited by JayMeHD - 4/11/11 at 12:24pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
post #8 of 10
Thread Starter 
Triple bump to say that when I load CPU-Z with all default settings, it states Core Speed 1648.3Mhz Multiplier: 16x Bus Speed: 103.0

Then it will quickly switch to a 42 multiplier pushing the clock to around 4.3 and then reverts back



I am losing faith in life ¬_¬
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
post #9 of 10
Thread Starter 
UPDATE: FIXED AND RUNNING AT 4.5Ghz

I have no idea how, but it's now done!

Thanks for the support!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Stock Asus P8P67 Pro HD 6970 8GB Corsair XMS3 1600Mhz 
Hard DriveOptical DriveOSMonitor
1TB Samsung Samsung 22x Windows 7 Ultimate (64bit) Phillips 23" 1080p 
KeyboardPowerCaseMouse
Wireless Laser Desktop 6000 Civico 900w Collermaster Wireless Laser Desktop 6000 
  hide details  
Reply
post #10 of 10
Hi Jay

Did you ever work out how you fixed this? I'm suffering from exactly the same problem, the moment i change any settings in advanced and reset it reverts to the standard settings and the EZ mode. Have tried clearing the cmos but to no avail.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Asus P8P67 Pro + i5 2500K + OC = Reset