Overclock.net › Forums › Graphics Cards › AMD/ATI › Flashed 5850 BIOS...and now it won't switch to 3D clocks
New Posts  All Forums:Forum Nav:

Flashed 5850 BIOS...and now it won't switch to 3D clocks

post #1 of 3
Thread Starter 
I flashed 900/1150 onto my card and now it doesn't switch to the 3D clocks and it always stays at 400/900. I even tried setting 900/1150 to all the state settings and it still remains at 400/900.

What would happen if I only modified the voltage, then flashed? Would I be able to switch to 3D clocks then?
post #2 of 3
Well if you GPU is not doing anything it will sit in an idle state. Run Furmark and use gpu-z to see what the clocks are running at during the test.
post #3 of 3
Thread Starter 
That's the point...it doesn't switch to 3D clocks...
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Flashed 5850 BIOS...and now it won't switch to 3D clocks