IE: 1800 (and 3500 DPI) on these newer Avago sensors.
3G benched by sujoy.
|The DeathAdder's solid performance begins to deteriorate when you change the hardware resolution from the highest setting of 1800dpi. At both 900 and 450 dpi the mouse develops a clipping problem that can be seen by the flat response after a certain speed. Also the mouse hits Malfunction Speed earlier. This is a strange result and I retested several times to make sure it was correct. With the mouse moving at exactly the same speed, it would response perfectly at 1800dpi but skip at 450 or 900dpi.|
|Clearly there is a hardware problem that the DeathAdder exhibits when you use both the 900dpi and 450dpi settings. You hit negative acceleration sooner and also get malfunction at lower speeds. My recommendation is to leave the mouse at 1800dpi and not touch the lower resolution settings until this problem has been solved, possibly by a firmware update. So instead of using the 900 and 450dpi settings, simply halve or quarter your sensitivity in-game instead.|
Here's a 3.0/1.1/WMO graph for comparison of sensor performance @ 250-1000 Hz.
Perfect control: DA@ 450-1800(3500) DPI (ADNS-3668/3888)> 518 @ 400-1600 DPI (ADNS-3080)>Classic MS mice.(OS MLT 04)
Malfunction rate: 518@ 400-1600 DPI (ADNS-3080)> DA @ 450-1800(3500) DPI (ADNS-3668/3888) >Classic MS mice (OS MLT 04)
Edited by Skylit - 4/13/11 at 11:00am