Overclock.net › Forums › Case Mods & Cases › Computer Cases › Hardware installtion in Bays in Haf-X?
New Posts  All Forums:Forum Nav:

Hardware installtion in Bays in Haf-X?

post #1 of 3
Thread Starter 
Ok so i have this HAF-X i am building
But what order should i put the hardware into the bay

The hardware to be installed into the bays are
Lamptron Fc6 rehobus
LG blueray player
Lg dvd player
B-move card reader

that + ofcourse the SSD and HHD that goes in the hotswaps

In HAF-X there is 4 bays and 2 hotswaps under there where i though of putting hardisks
so i easy can change a hardisk
also important that i place atleast the 2 burner close together

First i though of putting the Card reader on top in Bay 1
then lamptron rehobus in Bay 2, then blueray, then dvd at last in bay 4
But considering the card reader is not that pretty
since it has that ugly logo
i was thinking of putting it last in bay 4

so order goes like this from top:
Bay 1: Lamptron Fc6
Bay 2: Blueray LG
Bay 3: Dvd LG
Bay 4: Cardreader B-move
Hotswap1: SSD
Hotwap2: HHD

What would be the best order here?

having the rehobus at top not sure if that is so good
since i be having the case on top of my table to the right of me
maybe hard to see the display if is too high up?


Also you can see HAF-X under here
since on top it has the usb holes
having more holes putting the B-move card reader on top i dont think it look that good
thats why i though of putting the card reader in the last 4th bay
right over the SSD in the first hotswap


cooler_master_haf_x_001.jpg

On this other photo not of a HAF-X case but he has put the Rehobus lamptron fC6 at top
look good that way or too high up?
2nvxikp.jpg
Edited by Gilgamesh9 - 4/13/11 at 4:33pm
post #2 of 3
if you put the reader on top, it'll sorta blend in with the rest......then put the controller, and then dvd drives
    
CPUMotherboardGraphicsRAM
X5680@4.8GHz 192x25x1.47v EVGA X58 Classified(E759) EVGA GTX980 Ti SLI @1515/8400 6x4GB GSkill Ripjaws@1540 8-8-8-20-2T-1.55v 
Hard DriveHard DriveHard DriveCooling
Corsair Force GT 120GB/OS Corsair Force LS 60GB/PAGE Toshiba 4TB/GAMES CPU-EK Supremacy 
CoolingCoolingCoolingCooling
MB-EK FB Classified GPU-EK FC TitanX/Backplates Rad-Swiftech 360mm MCR-320/Pump Rad-Barrow 280mm 
CoolingCoolingCoolingOS
Ram-Corsair 2x60mm Resevoir-Barrow 250x50mm Misc-6x120mm/2x140mm/NZXT Sentry,Barrow 3/8 fit... Windows 10 Pro x64 
MonitorKeyboardPowerCase
Seiki 50'' 3840x2160 30hz Logitech G110 EVGA Supernova G2 1300 Lian Li PC-A77F 
MouseMouse PadOtherOther
Logitech G9x Xtrac Ripper XL Logitech G27 Logitech G940 
Other
Xbox One controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
X5680@4.8GHz 192x25x1.47v EVGA X58 Classified(E759) EVGA GTX980 Ti SLI @1515/8400 6x4GB GSkill Ripjaws@1540 8-8-8-20-2T-1.55v 
Hard DriveHard DriveHard DriveCooling
Corsair Force GT 120GB/OS Corsair Force LS 60GB/PAGE Toshiba 4TB/GAMES CPU-EK Supremacy 
CoolingCoolingCoolingCooling
MB-EK FB Classified GPU-EK FC TitanX/Backplates Rad-Swiftech 360mm MCR-320/Pump Rad-Barrow 280mm 
CoolingCoolingCoolingOS
Ram-Corsair 2x60mm Resevoir-Barrow 250x50mm Misc-6x120mm/2x140mm/NZXT Sentry,Barrow 3/8 fit... Windows 10 Pro x64 
MonitorKeyboardPowerCase
Seiki 50'' 3840x2160 30hz Logitech G110 EVGA Supernova G2 1300 Lian Li PC-A77F 
MouseMouse PadOtherOther
Logitech G9x Xtrac Ripper XL Logitech G27 Logitech G940 
Other
Xbox One controller 
  hide details  
Reply
post #3 of 3
Thread Starter 
Are u sure i mean the card reader has more holes that + the holes for usb already on the case make it look like the top for input is very large...
and then that b-move logo is so ugly i am even considering painting over the b-move word

anyway what i am sure about is that the Lamptron Fc6 must either be
in Bay 1 or Bay 2
Quote:
Originally Posted by Vlasov_581;13115223 
if you put the reader on top, it'll sorta blend in with the rest......then put the controller, and then dvd drives
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Hardware installtion in Bays in Haf-X?