Overclock.net › Forums › Cooling › Water Cooling › [Official] Antec Kühler H2O 620 & 920 Owners Club
New Posts  All Forums:Forum Nav:

[Official] Antec Kühler H2O 620 & 920 Owners Club - Page 221

Poll Results: Which Antec cooler do you own?

 
  • 54% (152)
    Antec Kühler H2O 620
  • 45% (129)
    Antec Kühler H2O 920
281 Total Votes  
post #2201 of 6063
Quote:
Originally Posted by M3TAl View Post

That's sick! thumb.gif
I don't understand what you mean exactly. You disconnected the antec fan meaning there was no fans on the radiator at all, causing 25C higher temps? Then you had 2 fans on the radiator connected to the motherboard headers? What is wrong with having the fans connected to motherboard headers? I don't understand.
EDIT: If you want to run 2 PWM fans from a PWM header on your motherboard then buy a Y-Splitter PWM cable and connect it the the CPU_OPT header on your M5A99FX board. PWM Y-Splitter Note that the headers support MAX 1Amp or 12watts.
Thanks! smile.gif I experienced the temps got much higher when i disconnected the antec fan from the 620 system and had installed two other fans PnP, but those got power from my case 3 pins headers/contacts, it was like the 620 dysfunction when I just disconnected the antec fan from it doh.gif

I'm sure you know what little miss I surely did, I thought it would run as before, but it didn't, so when I just connected the antec fan again to 620 contact, It runs as smoothly as usual (also mounted a second fan at that time too)! tongue.gif

I have three 4-pin connecters on my motherboard unused and even a CPU_OPT 4 pin unused, so I have headers enough when I buy new fans smile.gif
Quote:
Originally Posted by MGF Derp View Post

Thanks. And do what is said to run two pwm fans off the same header. If you mean how do you mount you can either take two screws from the current Antec and mount each new fan with two screws or buy four more screws like the ones supplied with the Antec and mount the second fan with those. Believe the screws are something like 6-32 x 30 or something.
The screws I got by mail service yesterday, it's 6-32 x 30mm screws exaxtly as you say smile.gif
Sorry for being a little bit dumb or stupid with my questions/wonderings, but I'm a little bit new to some things blushsmiley.gif
    
CPUMotherboardGraphicsRAM
AMD AM3+ FX-8120 Asus M5A99FX PRO R2.0, 990FX Socket AM3+ HIS Radeon HD 7950 IceQ Boost Clock 3GB Crucial Ballistix Tactical Kit 8GB @1866mhz 9-9... 
Hard DriveHard DriveOptical DriveCooling
Corsair SSD Force Series 3 Sata 6GB/s Western Digital Caviar Black Sata 6GB/s Samsung DVD/RW Antec Kühler H2O 620 
CoolingCoolingCoolingCooling
Dual 120mm Akasa Viper Arctic Silver 5 Cooling Paste Bitfenix Spectre PRO 200mm NZXT 200mm Blue LED 
CoolingOSKeyboardPower
Dual 120mm Revoltec Crystal Green LED Windows 8 Pro 64-bit Razer Lycosa Mirror Enermax Maxrevo 1200W 
CaseMouseMouse PadAudio
NZXT Phantom Pink Razer Lachesis Refresh Multicolor 5600 DPI Qpad Grin Logitech Z-623 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD AM3+ FX-8120 Asus M5A99FX PRO R2.0, 990FX Socket AM3+ HIS Radeon HD 7950 IceQ Boost Clock 3GB Crucial Ballistix Tactical Kit 8GB @1866mhz 9-9... 
Hard DriveHard DriveOptical DriveCooling
Corsair SSD Force Series 3 Sata 6GB/s Western Digital Caviar Black Sata 6GB/s Samsung DVD/RW Antec Kühler H2O 620 
CoolingCoolingCoolingCooling
Dual 120mm Akasa Viper Arctic Silver 5 Cooling Paste Bitfenix Spectre PRO 200mm NZXT 200mm Blue LED 
CoolingOSKeyboardPower
Dual 120mm Revoltec Crystal Green LED Windows 8 Pro 64-bit Razer Lycosa Mirror Enermax Maxrevo 1200W 
CaseMouseMouse PadAudio
NZXT Phantom Pink Razer Lachesis Refresh Multicolor 5600 DPI Qpad Grin Logitech Z-623 
  hide details  
Reply
post #2202 of 6063
Quote:
Originally Posted by Macke93 View Post

The screws I got by mail service yesterday, it's 6-32 x 30mm screws exaxtly as you say smile.gif
Sorry for being a little bit dumb or stupid with my questions/wonderings, but I'm a little bit new to some things blushsmiley.gif

No such thing as a dumb question. Glad it is going to work out for you. And if you need anymore help, just ask. Thats what OCN is for. ps: Go me for remembering there 6-32 x 30 without looking it up lol.
post #2203 of 6063
Quote:
Originally Posted by MGF Derp View Post

No such thing as a dumb question. Glad it is going to work out for you. And if you need anymore help, just ask. Thats what OCN is for. ps: Go me for remembering there 6-32 x 30 without looking it up lol.
Thanks man ! smile.gif You guys are very helpful even when I sometimes doesnt say it with correct english, but I do my best ! biggrin.gif
Cred for your memory, haha! (I just take photos of the screw package, so I will remember it LOL tongue.gif)

Next up for my build is new graphics card! Going to be some of the GTX 670 4GB proberly, but I'll proberly post a picture when it's time! smile.gif
    
CPUMotherboardGraphicsRAM
AMD AM3+ FX-8120 Asus M5A99FX PRO R2.0, 990FX Socket AM3+ HIS Radeon HD 7950 IceQ Boost Clock 3GB Crucial Ballistix Tactical Kit 8GB @1866mhz 9-9... 
Hard DriveHard DriveOptical DriveCooling
Corsair SSD Force Series 3 Sata 6GB/s Western Digital Caviar Black Sata 6GB/s Samsung DVD/RW Antec Kühler H2O 620 
CoolingCoolingCoolingCooling
Dual 120mm Akasa Viper Arctic Silver 5 Cooling Paste Bitfenix Spectre PRO 200mm NZXT 200mm Blue LED 
CoolingOSKeyboardPower
Dual 120mm Revoltec Crystal Green LED Windows 8 Pro 64-bit Razer Lycosa Mirror Enermax Maxrevo 1200W 
CaseMouseMouse PadAudio
NZXT Phantom Pink Razer Lachesis Refresh Multicolor 5600 DPI Qpad Grin Logitech Z-623 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD AM3+ FX-8120 Asus M5A99FX PRO R2.0, 990FX Socket AM3+ HIS Radeon HD 7950 IceQ Boost Clock 3GB Crucial Ballistix Tactical Kit 8GB @1866mhz 9-9... 
Hard DriveHard DriveOptical DriveCooling
Corsair SSD Force Series 3 Sata 6GB/s Western Digital Caviar Black Sata 6GB/s Samsung DVD/RW Antec Kühler H2O 620 
CoolingCoolingCoolingCooling
Dual 120mm Akasa Viper Arctic Silver 5 Cooling Paste Bitfenix Spectre PRO 200mm NZXT 200mm Blue LED 
CoolingOSKeyboardPower
Dual 120mm Revoltec Crystal Green LED Windows 8 Pro 64-bit Razer Lycosa Mirror Enermax Maxrevo 1200W 
CaseMouseMouse PadAudio
NZXT Phantom Pink Razer Lachesis Refresh Multicolor 5600 DPI Qpad Grin Logitech Z-623 
  hide details  
Reply
post #2204 of 6063
Hi All,

If anyone is interested, I found the 920 for $74.99 , free shipping over here

http://us.ncix.com/products/?sku=60587&vpn=KUHLER%20H20920&manufacture=Antec&promoid=1371

Have to use code 60587-1371 to get 4.99 off.


I have a question, how do the pump and the radiator hoses have to be oriented? My thinking is to have the pump tubes off the cooler facing down toward the bottom of the case and have the radiator tubes oriented to the top of the case and have them come down and loop toward the cooler from the bottom, that way the pump will not be working against gravity on the CPU side. Or is it better to have the the radiator oriented so that those tubes are also toward the bottom of the case ? Thoughts?

also , I am installing this in the Antec Lanboy Air which by design is supposed to have all the fans blowing are inward into the case to create negative pressure. Should I do a push pull out with this cooler and keep everything else blowing inward?
post #2205 of 6063
Hey guys sorry for the noob question, how do u get the validation of your club to show up on your signature?
Proof !
(2 photos)
My computer
(9 items)
 
Reply
Proof !
(2 photos)
My computer
(9 items)
 
Reply
post #2206 of 6063
Quote:
Originally Posted by ppeewang View Post

Hi All,
If anyone is interested, I found the 920 for $74.99 , free shipping over here
http://us.ncix.com/products/?sku=60587&vpn=KUHLER%20H20920&manufacture=Antec&promoid=1371
Have to use code 60587-1371 to get 4.99 off.
I have a question, how do the pump and the radiator hoses have to be oriented? My thinking is to have the pump tubes off the cooler facing down toward the bottom of the case and have the radiator tubes oriented to the top of the case and have them come down and loop toward the cooler from the bottom, that way the pump will not be working against gravity on the CPU side. Or is it better to have the the radiator oriented so that those tubes are also toward the bottom of the case ? Thoughts?
also , I am installing this in the Antec Lanboy Air which by design is supposed to have all the fans blowing are inward into the case to create negative pressure. Should I do a push pull out with this cooler and keep everything else blowing inward?

Not sure if having the hoses in different positions has any affect on cooling performance or the pump. I'm also not aware of any testing that indicates this. I put my hoses in whatever position makes them easiest to work with inside my case.

Having all intake fans would be positive pressure. If you have more CFM exhausting than intaking you have negative pressure.
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
post #2207 of 6063
Quote:
Originally Posted by bf3player1978 View Post

Hey guys sorry for the noob question, how do u get the validation of your club to show up on your signature?

[php]Snorkle.gifAntec Kühler H2O 620/920 ClubSnorkle.gif[/php]
Copy that then go to your "My Profile" on the top of the OCN website. Once in your profile scroll to your signature and click edit signature and then paste the previously copied material into your signature and save, thumb.gif
post #2208 of 6063
Quote:
Originally Posted by MGF Derp View Post

[php]Snorkle.gifAntec Kühler H2O 620/920 ClubSnorkle.gif[/php]
Copy that then go to your "My Profile" on the top of the OCN website. Once in your profile scroll to your signature and click edit signature and then paste the previously copied material into your signature and save, thumb.gif

thanks but it did not work blushsmiley.gif
Proof !
(2 photos)
My computer
(9 items)
 
Reply
Proof !
(2 photos)
My computer
(9 items)
 
Reply
post #2209 of 6063
Quote:
Originally Posted by bf3player1978 View Post

thanks but it did not work blushsmiley.gif
Code:
[CENTER]:Snorkle:[URL=http://www.overclock.net/t/990111/antec-k-hler-h2o-620-920-club][B]Antec Kühler H2O 620/920[/B][/URL]:Snorkle:[/CENTER]
Try copying that into your signature. thumb.gif
Edited by MGF Derp - 8/17/12 at 9:03pm
post #2210 of 6063
Quote:
Originally Posted by MGF Derp View Post

Code:
[CENTER]:Snorkle:[URL=http://www.overclock.net/t/990111/antec-k-hler-h2o-620-920-club][B]Antec Kühler H2O 620/920[/B][/URL]:Snorkle:[/CENTER]
Try copying that into your signature. thumb.gif

thanks that one worked
Proof !
(2 photos)
My computer
(9 items)
 
Reply
Proof !
(2 photos)
My computer
(9 items)
 
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Antec Kühler H2O 620 & 920 Owners Club