Overclock.net › Forums › Cooling › Water Cooling › [Official] Antec Kühler H2O 620 & 920 Owners Club
New Posts  All Forums:Forum Nav:

[Official] Antec Kühler H2O 620 & 920 Owners Club - Page 293

Poll Results: Which Antec cooler do you own?

 
  • 54% (152)
    Antec Kühler H2O 620
  • 45% (129)
    Antec Kühler H2O 920
281 Total Votes  
post #2921 of 6063
just realized that the Corsair fans are not 4 pin -

does that mean i cant control them with the Chill software if plugged into CPU header ?
post #2922 of 6063
Thread Starter 
Quote:
Originally Posted by expresso View Post

really - i was worried something was wrong - so if i get these temps at 4.4 with everything else auto -
how can i get to 4.5 or 4.7 wont it be too high temps and shut it down - ? i though i had to keep it at 90C max during load
i was thinking of changing the fans to Corsair HP fans - high static pressure model ?
do you think that would help ? i notice the static pressure on the corsair fans are 3.1 - - CFM is 62
my cougar fans say 119 CFM - static pressure i think is 2.2
should i change them and see if any difference ?

There might be a little difference yes, but under p95 those temps are normal man.
I wouldn't worry about it smile.gif
post #2923 of 6063
Interested in joining. I'm using the 620 with the included fan on the outer side of the rad, and a 4-pin molex fan pushing from the inside.

image_id_892628_thumb.jpeg
Note: Click for enlarged view.

Temps using this configuration keep me below 55C at full load, even when pushing my vcore and clock speed as far as I can.. and usually as low as 28-30C at idle.. Simply amazing for a closed-loop cpu cooler IMO.. And I picked it up for $35 at my local Canada Computers... biggrin.gif

Can't seem to add myself to the Member list, so hopefully someone is still actively adding members?
The link below the member list in the OP ...
... brings me to a list of people with Intel chipsets, and seems to have nothing to do with the Antec Kuhler Members doc.. headscratch.gif

Thanks in advance for letting me join my first OCN club, and I'm proud it's for such a "cool" cooler. thumb.gif
Edited by NFleck - 1/6/13 at 8:26pm
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
post #2924 of 6063
i was using Intelburn to stress test - i didnt use p95 - would that make a difference ?


if i wanted to try the Corsair fans SP models - they are 3 pin - how would that work - would i still be able to control it with the chill software or they would just run at full speed all the time ?


also my new 920 the pump speed is now at 3000 sometimes 3040 - and sometimes drops to 2960 etc, and back up to 3000 mostly

i just used it two days so far

is this normal
post #2925 of 6063
Bought me one of these Antec 620 and switched the fan with a Noiseblocker Blacksilent Pro PLPS 1.83 Static Pressure cool temps and no noise at all thumb.gif 3570K @ 4.7GHz 1.28v
Prime95 1h 72c max

post #2926 of 6063
Thread Starter 
Quote:
Originally Posted by expresso View Post

i was using Intelburn to stress test - i didnt use p95 - would that make a difference ?
if i wanted to try the Corsair fans SP models - they are 3 pin - how would that work - would i still be able to control it with the chill software or they would just run at full speed all the time ?
also my new 920 the pump speed is now at 3000 sometimes 3040 - and sometimes drops to 2960 etc, and back up to 3000 mostly
i just used it two days so far
is this normal

well yes and no - I can't fully contorl my SP120's.
As for test - IBT outputs higher temps than usual so - that's fine.

As for pump speed, yes that's normal smile.gif
I would focus on your rig and ensuring everything works - I think your temps and setup is fine amigo!
post #2927 of 6063
thats a relief to hear - but i am still concerned - since if i am only doing 4.4 - and getting those temps -

how would i be able to get to 4.5 or 4.7 and stay under 100C -


i will try prime 95 tomorrow and check the temps

about the fans - what do you mean yes and no - if i get them and put them on the cooler - plug them in the CPU header


can i use the chill software to control them or do they just run full speed


if they do run full speed only - how bad is that - how loud ? it says 34db - but dont know what that would sound like
post #2928 of 6063
Thread Starter 
Quote:
Originally Posted by expresso View Post

thats a relief to hear - but i am still concerned - since if i am only doing 4.4 - and getting those temps -
how would i be able to get to 4.5 or 4.7 and stay under 100C -
i will try prime 95 tomorrow and check the temps
about the fans - what do you mean yes and no - if i get them and put them on the cooler - plug them in the CPU header
can i use the chill software to control them or do they just run full speed
if they do run full speed only - how bad is that - how loud ? it says 34db - but dont know what that would sound like

Well why are you trying to go so high in OC?
With IVY - temps go up really high, and if you don't have appropriate cooling you won't manage to do so.

I can't realistically go over 4.7.
So I'm at 4.5 ghz.

Long story short: Keep your fans.
post #2929 of 6063
Can the program Speed Fan - control the fans if they did run at full speed ?

maybe have a option which is great -
post #2930 of 6063
Thread Starter 
Quote:
Originally Posted by expresso View Post

Can the program Speed Fan - control the fans if they did run at full speed ?
maybe have a option which is great -

Don't know haven't tried.


To other owners:
Am I right in assuming most of you don't have the DB indicator for your Antec's?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Antec Kühler H2O 620 & 920 Owners Club