Overclock.net › Forums › Intel › Intel CPUs › 9 hours p95 blend BSOD - What?
New Posts  All Forums:Forum Nav:

9 hours p95 blend BSOD - What?

post #1 of 7
Thread Starter 
Hey.


I recently got watercooling and also have updated bios.. Only thing changed.



This was when I was running with DH-14. 12 hours went fine.
Now after I got watercooling, I use exact same settings and I get BSOD at 9 hours..

I did get BSOD at 9hours at 1.415V and now again at 1.424V after 9 hours. I think it's quite strange.

It's 0x00000124 error both times, so I first thought it was vcore, but I tried upping that as you can see but it doesn't help.


- What do I need to change?`I'm trying again at this momment, I changed PLL to 1.793 instead of auto, and VRM freq to 350 instead of 360 and CPU Cap % to 130% instead of 110%.


Hope you got any idea what could be wrong.. I think it's quite strange.
überness
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5GHz 1.28V 24/7 P8P67 Deluxe EVGA 460 @763mhz SLI G-skill 1866 mhz CL9 1.6v 
Hard DriveOSMonitorKeyboard
1TB WD Black Windows 7 Ultimate 64bit BenQ 24" LCD G2420HD G15 
PowerCaseMouseMouse Pad
Corsair AX 850W Cooler Master CM 690 II Advanced Black G500 Steelseries ++ 
  hide details  
Reply
überness
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5GHz 1.28V 24/7 P8P67 Deluxe EVGA 460 @763mhz SLI G-skill 1866 mhz CL9 1.6v 
Hard DriveOSMonitorKeyboard
1TB WD Black Windows 7 Ultimate 64bit BenQ 24" LCD G2420HD G15 
PowerCaseMouseMouse Pad
Corsair AX 850W Cooler Master CM 690 II Advanced Black G500 Steelseries ++ 
  hide details  
Reply
post #2 of 7
Maybe this is usefull:

Bsod code list:
Quote:
BSOD codes for overclocking
BSOD Codes for i7 x58 chipset
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

BSOD Codes for SandyBridge
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instancesâ€
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
I took it out of this thread:
Click
Blazer
(8 items)
 
  
CPUMotherboardRAMHard Drive
Intel i7 4790K MSI MPower Z97 Adata XPG 2x8GB DDR3-2600 Crucial M500 120GB SSD 
Hard DriveHard DriveHard DrivePower
Samsung 830 128GB SSD Cruscial MX200 250GB SSD WD 1TB HDD Seasonic M12II Evo 750W 
  hide details  
Reply
Blazer
(8 items)
 
  
CPUMotherboardRAMHard Drive
Intel i7 4790K MSI MPower Z97 Adata XPG 2x8GB DDR3-2600 Crucial M500 120GB SSD 
Hard DriveHard DriveHard DrivePower
Samsung 830 128GB SSD Cruscial MX200 250GB SSD WD 1TB HDD Seasonic M12II Evo 750W 
  hide details  
Reply
post #3 of 7
Thread Starter 
Quote:
Originally Posted by prescotter View Post
Maybe this is usefull:

Bsod code list:


I took it out of this thread:
Click
Well the only BSOD I get is 0x0000124 and I tried vcore and it should be stable at 1.424V it has been before...


maybe it's VTT then?
überness
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5GHz 1.28V 24/7 P8P67 Deluxe EVGA 460 @763mhz SLI G-skill 1866 mhz CL9 1.6v 
Hard DriveOSMonitorKeyboard
1TB WD Black Windows 7 Ultimate 64bit BenQ 24" LCD G2420HD G15 
PowerCaseMouseMouse Pad
Corsair AX 850W Cooler Master CM 690 II Advanced Black G500 Steelseries ++ 
  hide details  
Reply
überness
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5GHz 1.28V 24/7 P8P67 Deluxe EVGA 460 @763mhz SLI G-skill 1866 mhz CL9 1.6v 
Hard DriveOSMonitorKeyboard
1TB WD Black Windows 7 Ultimate 64bit BenQ 24" LCD G2420HD G15 
PowerCaseMouseMouse Pad
Corsair AX 850W Cooler Master CM 690 II Advanced Black G500 Steelseries ++ 
  hide details  
Reply
post #4 of 7
With the air cooler you were probably pulling heat from your ram. The hotter the more resistance more voltage battle.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz HT 1.272v GIGABYTE P67A-UD4-B3 Sapphire HD5870 1GB G.Skill Ripjaws DDR3 1600 (2x2) 
Hard DriveOSMonitorKeyboard
X2 Western Digital Black Sata 500GB (RAID 0) Win7 Ult x64 ASUS 24'in VW246H Logitech 
PowerCaseMouse
Zalman ZM1000-HP CM Storm Scout Logitech 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz HT 1.272v GIGABYTE P67A-UD4-B3 Sapphire HD5870 1GB G.Skill Ripjaws DDR3 1600 (2x2) 
Hard DriveOSMonitorKeyboard
X2 Western Digital Black Sata 500GB (RAID 0) Win7 Ult x64 ASUS 24'in VW246H Logitech 
PowerCaseMouse
Zalman ZM1000-HP CM Storm Scout Logitech 
  hide details  
Reply
post #5 of 7
watch out, in the 70's hoses get soft and can cause leaks.
Toro
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 4114.2 MHz 1.328V ASUS P6X58D PREMIUM SAPPHIRE Radeon HD 6970 2GB Mushkin Enhanced Blackline 6GB (3 x 2GB) 
Hard DriveOptical DriveOSPower
2X estern Digital Caviar Black WD7501AALS 750GB LG DVD Burner - Bulk Black SATA Model GH24NS50 - O Windows 7 XFX Black Edition XPS-850W-BES 850W 
Case
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel A 
  hide details  
Reply
Toro
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 4114.2 MHz 1.328V ASUS P6X58D PREMIUM SAPPHIRE Radeon HD 6970 2GB Mushkin Enhanced Blackline 6GB (3 x 2GB) 
Hard DriveOptical DriveOSPower
2X estern Digital Caviar Black WD7501AALS 750GB LG DVD Burner - Bulk Black SATA Model GH24NS50 - O Windows 7 XFX Black Edition XPS-850W-BES 850W 
Case
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel A 
  hide details  
Reply
post #6 of 7
Quote:
Originally Posted by Toro894 View Post
watch out, in the 70's hoses get soft and can cause leaks.
Never heard that.. I've seen 70 - 80c for hours of stressing, never had a leak...

Although I doubt my water was ever even close to 70c (158f) as the cpu would be pretty hat by that point... thats the purpose of the pump, keep the water moving, hence it stays cool and cools whatever it touches...

@OP, try putting a fan on your ram & NB heatsink, it could be they are getting warmer now that you dont have the airflow from you heatsink fans like Jason mentioned

Use Everest or HWMonitor Pro to see what your board temps and VREG temps are..
Edited by 10acjed - 4/15/11 at 10:18am
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
post #7 of 7
not all BIOSes are identical....this should be pretty clear whats up.
The 775 Legend
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 @ 5.8 -- 1.736v Rampage Formula! GTX550ti Vmod! OCZ D9's @ 1200+ cas 5 
OSMonitorPowerCase
XPEEEEEEEEEEEEEEEEEEEEEEE XGA 800x600 TR2-RX 850W Neoprene sheet 
  hide details  
Reply
The 775 Legend
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 @ 5.8 -- 1.736v Rampage Formula! GTX550ti Vmod! OCZ D9's @ 1200+ cas 5 
OSMonitorPowerCase
XPEEEEEEEEEEEEEEEEEEEEEEE XGA 800x600 TR2-RX 850W Neoprene sheet 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 9 hours p95 blend BSOD - What?