Overclock.net › Forums › Specialty Builds › HTPC › Hauppauge remote and XBMC not working right.
New Posts  All Forums:Forum Nav:

Hauppauge remote and XBMC not working right.

post #1 of 4
Thread Starter 
Have the 45 button Hauppauge remote.

I'm Altering the iremote.ini file to allow to use in XBMC.

If I go into any menu selection (i.e. music) and then go back out to the main menu the remote stops working. I can hear sounds for it to want to work but it doesn't. I have to bump the mouse then use the keyboard to get it going again with the remote.

I've tried unplugging the mouse, turning it off in the settings. Don't even think that's the issue though.

Any help is much appreciated, thanks.

Code:
[Remote]
RepeatDelay=3
;Beep = 1           ; Sound for MessageBeep() to make for each Remote Keystroke
;PowerDownSound = 0 ; Sound for MessageBeep() to make when powering down
MenuLoad=1    ; use tray as app launcher
GoMenu=0

; map RC5 System Codes to button "name" lookup table
; Note: 0 (classic remote) conflicts with standard "philips" TV remotes
[SystemCode]
0=HCWClassic
28=HCWPVR2
29=HCWPVR2
30=HCWPVR2
31=HCWPVR
7=PCTV
; "IR Blaster" and 885/887 HW can support RC6; this is for the MS MCE remote table if desired
0x800f=MSMCE
; This supports using the MCE "Beanbag" remote with retail apps on non-MCE systems
0xffbc=MSMCERCV
0x2040=HCWPVR2

; these tables map actual IR scan codes to button "names" on a per system code basis
; Undefined values get the name "CODExx" by default (mostly for debugging)
; Real buttons on a remote should always get a real button name
; Note: some button "names" can only be generated by certain remotes
 
; Also, note that seemingly similar buttons may have unique names on different remotes
; This is to allow treating them differently based on the remote, and the
; "paradigm" of how they are used.  For example; on old remotes there is a seperate TV
; button, but no GRNPOWER button.  So, on old remotes we treat TV as on/off, where  on PVR
; remote we use the GoMenu function (or RED as On), and the GRNPOWER as Off.

[MSMCE]
12=GRNPOWER
23=REC
25=STOP
24=PAUSE
22=PLAY
21=REWIND
20=FASTFWD
26=SKIPFWD
27=SKIPREV
13=MCEJEWEL
35=BACK
38=GUIDE
32=NAVLEFT
33=NAVRIGHT
30=NAVUP
31=NAVDOWN
34=OK
37=LIVETV
74=VIDEOS
71=MUSIC
73=PICTURES
80=RADIO
70=TVNEW
14=MUTE
;16=VOLUP
;17=VOLDOWN
18=CHNLUP
19=CHNLDOWN
36=DVDMENU
0=0
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
10=CLEAR
11=ENTER
78=PRINT
72=RECORDEDTV
28=MCEPOUND
29=MCESTAR
128=MCE128
129=MCE129

90=TEXT
91=RED
92=GREEN
93=YELLOW
94=BLUE
15=MCEINFO

; First item in this section IS always the default app if no others found
[Applications]
Default=
;Debug.txt=
XBMC=
Media Center=
Debug.txt=
Hulu Desktop=
IR Remote=
FullScreen=

[Default]
OLD0=
0=
1=
2=
3=
4=
5=
6=
7=
8=
9=
;TV={close(radio.exe)}{sleep(750)}{run(wintv7\\wintv7.exe)}
;TVNEW={close(radio.exe)}{sleep(750)}{run(wintv7\\wintv7.exe)}
SOURCE={switch(*task*)}{shift}{tab}
MINIMIZE=
FULLSCREEN={alt}{space}x
RESERVED=

; close current active window; disabled for now
;GRNPOWER={sys(0xF060)}
GRNPOWER={run(C:\\windows\\ehome\\ehshell.exe)}
MCEJEWEL={run(C:\\windows\\ehome\\ehshell.exe)}
;GUIDE={run(epgdemo.exe)}
;GO={close(radio.exe)}{sleep(750)}{run(wintv7\\wintv7.exe)}
;GO={run(hcwGo\\hcwGo.exe)}
MENU={switch(*task*)}{shift}{tab}

;;these 3 buttons are not offical yet
;RED={close(radio.exe)}{sleep(750)}{run(wintv7\\wintv7.exe)}
;GREEN={close(wintv7.exe)}{sleep(750)}{run(radio.exe)}
;YELLOW={close(radio.exe)}{sleep(750)}{run(..\\vtplus\\vtplus32.exe)}
;TEXT={close(radio.exe)}{sleep(750)}{run(..\\vtplus\\vtplus32.exe)}

;;default mappings to drive apps that use APPCOMMANDS on Win2000/XP
MUTE={app(0x80000)}
CHNLUP={app(0x330000)}
CHNLDOWN={app(0x340000)}
;VOLUP={app(0xa0000)}
;VOLDOWN={app(0x90000)}
REC={app(0x300000)}
STOP={app(0xd0000)}
PAUSE={app(0x2f0000)}
PLAY={app(0x2e0000)}
PAUSEPLAY={app(0xe0000)}
REWIND={app(0x320000)}
FASTFWD={app(0x310000)}
SKIPFWD={app(0xb0000)}
SKIPREV={app(0xc0000)}


; built-in IR gomenu()
[IR Remote]
OK={enter}
;VOLUP={tab}
;VOLDOWN={shift}{tab}
BACK={sys(0xF060)}
CHNLUP={shift}{tab}
CHNLDOWN={tab}
FULLSCREEN={enter}
SOURCE={enter}
OK={enter}
GO={enter}
GRNPOWER={esc}
NAVUP={shift}{tab}
NAVDOWN={tab}
NAVLEFT={shift}{tab}
NAVRIGHT={tab}


[Media Center]
;Exit app
GRNPOWER={ALT}{F4}

;Main MCE menu
GO={ALT}{HOME}
MCEJEWEL={ALT}{HOME}

TV={CTRL}t
TVNEW={CTRL}t
VIDEOS={CTRL}e
MUSIC={CTRL}m
PICTURES={CTRL}i
GUIDE={CTRL}g
MCEINFO={CTRL}g
RADIO={CTRL}a
BACK={backspace}
MENU={apps}

NAVDOWN={down}
NAVLEFT={left}
NAVRIGHT={right}
NAVUP={up}
OK={enter}

REC={Ctrl}r
PLAY={Ctrl}{shift}p
PAUSE={Ctrl}p
STOP={Ctrl}{shift}s
REWIND={Ctrl}{shift}b
FASTFWD={Ctrl}{shift}f
SKIPREV={Ctrl}b
SKIPFWD={Ctrl}f

MUTE={F8}
;VOLUP={F10}
;VOLDOWN={F9}
CHNLUP={pgup}
CHNLDOWN={pgdn}
;toggle full screen
CHNLPREV={alt}{enter}
FULLSCREEN={alt}{enter}

0=0
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
;Change the DVD subtitles selection
TEXT={ctrl}u
;Closed Captions On/Off
SUBCC={ctrl}{shift}c

;DVD Menu
GREEN={ctrl}{shift}m
;Recorded TV
RED={ctrl}{shift}t
;Change the DVD audio selection
YELLOW={ctrl}{shift}a
;toggle full screen
BLUE={alt}{enter}


; to use this, open notepad with a document name of debug.txt and set focus to it.
; debug.txt= must be uncommented in [applications] section as well.
[Debug.txt]
OLD0=OLD0{enter}
0=0{enter}
1=1{enter}
2=2{enter}
3=3{enter}
4=4{enter}
5=5{enter}
6=6{enter}
7=7{enter}
8=8{enter}
9=9{enter}
FULLSCREEN=FULLSCREEN{enter}
RADIO=RADIO{enter}
MUTE=MUTE{enter}
TV=TV{enter}
VOLUP=VOLUP{enter}
VOLDOWN=VOLDOWN{enter}
RESERVED=RESERVED{enter}
CHNLUP=CHNLUP{enter}
CHNLDOWN=CHNLDOWN{enter}
SOURCE=SOURCE{enter}
MINIMIZE=MINIMIZE{enter}

GREEN=GREEN{enter}
YELLOW=YELLOW{enter}
RED=RED{enter}
BLUE=BLUE{enter}
FUNC=FUNC{enter}
SKIPFWD=SKIPFWD{enter}
SKIPREV=SKIPREV{enter}
GRNPOWER=GRNPOWER{enter}
BACK=BACK{enter}
OK=OK{enter}
MENU=MENU{enter}
REC=REC{enter}
STOP=STOP{enter}
PLAY=PLAY{enter}
PAUSE=PAUSE{enter}
PAUSEPLAY=PAUSEPLAY{enter}
REWIND=REWIND{enter}
FASTFWD=FASTFWD{enter}
GO=GO{enter}

VIDEOS=VIDEOS{enter}
MUSIC=MUSIC{enter}
PICTURES=PICTURES{enter}
GUIDE=GUIDE{enter}
NAVLEFT=NAVLEFT{enter}
NAVRIGHT=NAVRIGHT{enter}
NAVUP=NAVUP{enter}
NAVDOWN=NAVDOWN{enter}
TEXT=TEXT{enter}
SUBCC=SUBCC{enter}
CHNLPREV=CHNLPREV{enter}
TVNEW=TVNEW{enter}

TEXT=TEXT{enter}
MCESTAR=MCESTAR{enter}
MCEPOUND=MCEPOUND{enter}
CLEAR=CLEAR{enter}
ENTER=ENTER{enter}
MCEINFO=MCEINFO{enter}
MCEJEWEL=MCEJEWEL{enter}
LIVETV=LIVETV{enter}
DVDMENU=DVDMENU{enter}
RECORDEDTV=RECORDEDTV{enter}

CODE0=CODE0{enter}
CODE1=CODE1{enter}
CODE2=CODE2{enter}
CODE3=CODE3{enter}
CODE4=CODE4{enter}
CODE5=CODE5{enter}
CODE6=CODE6{enter}
CODE7=CODE7{enter}
CODE8=CODE8{enter}
CODE9=CODE9{enter}
CODE10=CODE10{enter}
CODE11=CODE11{enter}
CODE12=CODE12{enter}
CODE13=CODE13{enter}
CODE14=CODE14{enter}
CODE15=CODE15{enter}
CODE16=CODE16{enter}
CODE17=CODE17{enter}
CODE18=CODE18{enter}
CODE19=CODE19{enter}
CODE20=CODE20{enter}
CODE21=CODE21{enter}
CODE22=CODE22{enter}
CODE23=CODE23{enter}
CODE24=CODE24{enter}
CODE25=CODE25{enter}
CODE26=CODE26{enter}
CODE27=CODE27{enter}
CODE28=CODE28{enter}
CODE29=CODE29{enter}
CODE30=CODE30{enter}
CODE31=CODE31{enter}
CODE32=CODE32{enter}
CODE33=CODE33{enter}
CODE34=CODE34{enter}
CODE35=CODE35{enter}
CODE36=CODE36{enter}
CODE37=CODE37{enter}
CODE38=CODE38{enter}
CODE39=CODE39{enter}
CODE40=CODE40{enter}
CODE41=CODE41{enter}
CODE42=CODE42{enter}
CODE43=CODE43{enter}
CODE44=CODE44{enter}
CODE45=CODE45{enter}
CODE46=CODE46{enter}
CODE47=CODE47{enter}
CODE48=CODE48{enter}
CODE49=CODE49{enter}
CODE50=CODE50{enter}
CODE51=CODE51{enter}
CODE52=CODE52{enter}
CODE53=CODE53{enter}
CODE54=CODE54{enter}
CODE55=CODE55{enter}
CODE56=CODE56{enter}
CODE57=CODE57{enter}
CODE58=CODE58{enter}
CODE59=CODE59{enter}
CODE60=CODE60{enter}
CODE61=CODE61{enter}
CODE62=CODE62{enter}
CODE63=CODE63{enter}

[Hulu Desktop]
NAVRIGHT={right}
NAVLEFT={left}
NAVUP={up}
NAVDOWN={down}
OK={enter}
PAUSE={enter}
STOP={enter}
PLAY={enter}
MENU={tab}
BACK={tab}

[XBMC]
0=0
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
GUIDE=o ;This will bring up your cpu/gpu usage in a video. The button is south west from mute
GO={home}
NAVUP={UP}
NAVDOWN={DOWN}
NAVLEFT={left}
NAVRIGHT={right}
OK={enter}
BACK={backspace} ;previously was esc which brought you to main menu, now it goes back one level
DVDMENU=m ;This will bring the play controls up in the video by hitting the button just right of your mute button
CHNLUP={pgup}
CHNLDOWN={pgdn}
REC=r
STOP=x
PAUSE={space}
PLAY=p
REWIND=r
FASTFWD=f
SKIPFWD=.
SKIPREV=,
MCEINFO=i ;this is your info button
TEXT=t ;that button at the very bottom of your controller turns subtitles on and off
GRNPOWER=s ;The Power button will bring up shutdown menu, don't hit your windows button
YELLOW=c ;contect menu
post #2 of 4
Thread Starter 
Anyone have any ideas on this? Or another way to do this? I've found little help online through Google searches.
post #3 of 4
Any luck getting it working with the addon I told you?
>.<
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 4.0ghz 1.27v EVGA E758 3-Way (black/gray) Evga GTX 480 / Evga 9800gtx+ (physx&folding) Corsair Dominator 6gb 1600 8-8-8-24 
Hard DriveOSMonitorPower
x25-M SSD 80gb + 1TB F3 + 2x2TB WD Green Win 7 64bit Viewsonic 20" + Samsung 40" Corsair 1000w 
Case
Haf 932 (modded) - Now caseless 
  hide details  
Reply
>.<
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 4.0ghz 1.27v EVGA E758 3-Way (black/gray) Evga GTX 480 / Evga 9800gtx+ (physx&folding) Corsair Dominator 6gb 1600 8-8-8-24 
Hard DriveOSMonitorPower
x25-M SSD 80gb + 1TB F3 + 2x2TB WD Green Win 7 64bit Viewsonic 20" + Samsung 40" Corsair 1000w 
Case
Haf 932 (modded) - Now caseless 
  hide details  
Reply
post #4 of 4
Thread Starter 
I did get it to work thank you!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: HTPC
Overclock.net › Forums › Specialty Builds › HTPC › Hauppauge remote and XBMC not working right.