Overclock.net › Forums › Intel › Intel CPUs › Need Help with Q6600 Overclocking...
New Posts  All Forums:Forum Nav:

Need Help with Q6600 Overclocking... - Page 4

post #31 of 66
Quote:
Originally Posted by skycbc5405;13159727 
thanks again. hey umm i just ran prime 95 for little bit for cpu stability test but the load temp shoots up to 82c. is that temp ok?

No, that is to high. What cooler do you have? And what's your load V-core?
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #32 of 66
im back to 9x333 at 3ghz,my volts are 1.375 in bios.tried 8x400 at 3,2ghz but i needed higher voltage to get there,and my fps in games arnt any better ,
82c is to hot,
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 2500k @4.1ghz asus p5kpl msi gamer r9 290 8gig g-skill ddr3 2x4gigs 
Hard DriveOptical DriveCoolingOS
mx500 ssd 240 gig pioneer 115 zalman windows 8.1 
MonitorKeyboardPowerCase
YAMAKASI QH2711 Black Label hiper silverstone 700w strider bronze atx 
Mouse
razer death adder 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 2500k @4.1ghz asus p5kpl msi gamer r9 290 8gig g-skill ddr3 2x4gigs 
Hard DriveOptical DriveCoolingOS
mx500 ssd 240 gig pioneer 115 zalman windows 8.1 
MonitorKeyboardPowerCase
YAMAKASI QH2711 Black Label hiper silverstone 700w strider bronze atx 
Mouse
razer death adder 
  hide details  
Reply
post #33 of 66
Thread Starter 
Quote:
Originally Posted by turrican9;13159734 
No, that is to high. What cooler do you have? And what's your load V-core?

i have coolermaster hyper 212+ with arctic silver 5 on it but arctic silver hasn't been cured yet as i just built my system 2 days ago. I used 1.5vcore which i think is bit high and i still can't get my ram run at its rated spec even with 1.75v. Could this possibly the faulty mem sticks or is it just hard to run 1600 speed with q6600?
Stock
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 @ 2400MHz ASRock P43DE3 Powercolor HD6950 2x 4gig DDR3 9-9-9-24 @1600 
Hard DriveOptical DriveOSMonitor
Hitachi 300Gb Sata LG IDE DVD ROM Win 7 ult sp1 64bit SAMSUNG P2770FH ToC Rose Black 27" 1ms Full HD 
PowerCase
Seasonic OEM 850W Silver Rated Antec 300 Illusion 
  hide details  
Reply
Stock
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 @ 2400MHz ASRock P43DE3 Powercolor HD6950 2x 4gig DDR3 9-9-9-24 @1600 
Hard DriveOptical DriveOSMonitor
Hitachi 300Gb Sata LG IDE DVD ROM Win 7 ult sp1 64bit SAMSUNG P2770FH ToC Rose Black 27" 1ms Full HD 
PowerCase
Seasonic OEM 850W Silver Rated Antec 300 Illusion 
  hide details  
Reply
post #34 of 66
Thread Starter 
Quote:
Originally Posted by bcham;13159761 
im back to 9x333 at 3ghz,my volts are 1.375 in bios.tried 8x400 at 3,2ghz but i needed higher voltage to get there,and my fps in games arnt any better ,
82c is to hot,

what would be the good load temp with this cpu? i see tha tj max is listed as 100c
Stock
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 @ 2400MHz ASRock P43DE3 Powercolor HD6950 2x 4gig DDR3 9-9-9-24 @1600 
Hard DriveOptical DriveOSMonitor
Hitachi 300Gb Sata LG IDE DVD ROM Win 7 ult sp1 64bit SAMSUNG P2770FH ToC Rose Black 27" 1ms Full HD 
PowerCase
Seasonic OEM 850W Silver Rated Antec 300 Illusion 
  hide details  
Reply
Stock
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 @ 2400MHz ASRock P43DE3 Powercolor HD6950 2x 4gig DDR3 9-9-9-24 @1600 
Hard DriveOptical DriveOSMonitor
Hitachi 300Gb Sata LG IDE DVD ROM Win 7 ult sp1 64bit SAMSUNG P2770FH ToC Rose Black 27" 1ms Full HD 
PowerCase
Seasonic OEM 850W Silver Rated Antec 300 Illusion 
  hide details  
Reply
post #35 of 66
Quote:
Originally Posted by skycbc5405;13159789 
i have coolermaster hyper 212+ with arctic silver 5 on it but arctic silver hasn't been cured yet as i just built my system 2 days ago. I used 1.5vcore which i think is bit high and i still can't get my ram run at its rated spec even with 1.75v. Could this possibly the faulty mem sticks or is it just hard to run 1600 speed with q6600?

You will only gain 2 - 3C after it has cured. What Load volts do you have on CPU? See if you can lower it.

About that RAM, it maybe your mobo is not liking them. However, you could begin to loosen the subtimings.

DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM tRFC
DRAM tWR
DRAM tWTR
DRAM tRRD
DRAM tRTP


Try to up all those with bold one notch up from their AUTO setting. If that does not work, try two notches up.


You could also try to up these

DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH0 RCOMP ODT [Auto]
DRAM CH0 G0 (Data)
DRAM CH0 G1 (Command)
DRAM CH0 G2 (Control1)
DRAM CH0 G3 (Control2)
DRAM CH0 G4 (Clocks1)
DRAM CH0 G5 (Clocks2)
DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH1 RCOMP ODT
DRAM CH1 G0 (Data)
DRAM CH1 G1 (Command)
DRAM CH1 G2 (Control1)
DRAM CH1 G3 (Control2)
DRAM CH1 G4 (Clocks1)
DRAM CH1 G5 (Clocks2)

Edited by turrican9 - 4/17/11 at 4:57am
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #36 of 66
Why does you sig say you have GDDR5?
    
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GA-P67A-UD3-B3 EVGA 570 8GB Gskill 1600mhz 
Hard DrivePower
1.5TB CORSAIR 850TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500K @ 4.5 GA-P67A-UD3-B3 EVGA 570 8GB Gskill 1600mhz 
Hard DrivePower
1.5TB CORSAIR 850TX 
  hide details  
Reply
post #37 of 66
Quote:
Originally Posted by Kirby1;13159858 
Why does you sig say you have GDDR5?

Probably RAM on his Graphics card. In the wrong spot..
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #38 of 66
i thaught all socket 775 boards had ddr2 ram no ddr3
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 2500k @4.1ghz asus p5kpl msi gamer r9 290 8gig g-skill ddr3 2x4gigs 
Hard DriveOptical DriveCoolingOS
mx500 ssd 240 gig pioneer 115 zalman windows 8.1 
MonitorKeyboardPowerCase
YAMAKASI QH2711 Black Label hiper silverstone 700w strider bronze atx 
Mouse
razer death adder 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 2500k @4.1ghz asus p5kpl msi gamer r9 290 8gig g-skill ddr3 2x4gigs 
Hard DriveOptical DriveCoolingOS
mx500 ssd 240 gig pioneer 115 zalman windows 8.1 
MonitorKeyboardPowerCase
YAMAKASI QH2711 Black Label hiper silverstone 700w strider bronze atx 
Mouse
razer death adder 
  hide details  
Reply
post #39 of 66
Thread Starter 
Quote:
Originally Posted by turrican9;13159825 
You will only gain 2 - 3C after it has cured. What Load volts do you have on CPU? See if you can lower it.

About that RAM, it maybe your mobo is not liking them. However, you could begin to loosen the subtimings.

DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM tRFC
DRAM tWR
DRAM tWTR
DRAM tRRD
DRAM tRTP


Try to up all those with bold one notch up from their AUTO setting. If that does not work, try two notches up.


You could also try to up these

DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH0 RCOMP ODT [Auto]
DRAM CH0 G0 (Data)
DRAM CH0 G1 (Command)
DRAM CH0 G2 (Control1)
DRAM CH0 G3 (Control2)
DRAM CH0 G4 (Clocks1)
DRAM CH0 G5 (Clocks2)
DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH1 RCOMP ODT
DRAM CH1 G0 (Data)
DRAM CH1 G1 (Command)
DRAM CH1 G2 (Control1)
DRAM CH1 G3 (Control2)
DRAM CH1 G4 (Clocks1)
DRAM CH1 G5 (Clocks2)

DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH0 RCOMP ODT [Auto]
DRAM CH0 G0 (Data)
DRAM CH0 G1 (Command)
DRAM CH0 G2 (Control1)
DRAM CH0 G3 (Control2)
DRAM CH0 G4 (Clocks1)
DRAM CH0 G5 (Clocks2)
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH1 RCOMP ODT
DRAM CH1 G0 (Data)
DRAM CH1 G1 (Command)
DRAM CH1 G2 (Control1)
DRAM CH1 G3 (Control2)
DRAM CH1 G4 (Clocks1)
DRAM CH1 G5 (Clocks2)

Do i just increase the settings by 1 or 2 notches from Auto ? and by notches you mean one + right?
Stock
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 @ 2400MHz ASRock P43DE3 Powercolor HD6950 2x 4gig DDR3 9-9-9-24 @1600 
Hard DriveOptical DriveOSMonitor
Hitachi 300Gb Sata LG IDE DVD ROM Win 7 ult sp1 64bit SAMSUNG P2770FH ToC Rose Black 27" 1ms Full HD 
PowerCase
Seasonic OEM 850W Silver Rated Antec 300 Illusion 
  hide details  
Reply
Stock
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 @ 2400MHz ASRock P43DE3 Powercolor HD6950 2x 4gig DDR3 9-9-9-24 @1600 
Hard DriveOptical DriveOSMonitor
Hitachi 300Gb Sata LG IDE DVD ROM Win 7 ult sp1 64bit SAMSUNG P2770FH ToC Rose Black 27" 1ms Full HD 
PowerCase
Seasonic OEM 850W Silver Rated Antec 300 Illusion 
  hide details  
Reply
post #40 of 66
Quote:
Originally Posted by skycbc5405;13159801 
what would be the good load temp with this cpu? i see tha tj max is listed as 100c

high 60s
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 2500k @4.1ghz asus p5kpl msi gamer r9 290 8gig g-skill ddr3 2x4gigs 
Hard DriveOptical DriveCoolingOS
mx500 ssd 240 gig pioneer 115 zalman windows 8.1 
MonitorKeyboardPowerCase
YAMAKASI QH2711 Black Label hiper silverstone 700w strider bronze atx 
Mouse
razer death adder 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 2500k @4.1ghz asus p5kpl msi gamer r9 290 8gig g-skill ddr3 2x4gigs 
Hard DriveOptical DriveCoolingOS
mx500 ssd 240 gig pioneer 115 zalman windows 8.1 
MonitorKeyboardPowerCase
YAMAKASI QH2711 Black Label hiper silverstone 700w strider bronze atx 
Mouse
razer death adder 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need Help with Q6600 Overclocking...