Overclock.net › Forums › Graphics Cards › AMD/ATI › Need feedback on my oc, 6950 his reference
New Posts  All Forums:Forum Nav:

Need feedback on my oc, 6950 his reference

post #1 of 5
Thread Starter 
My goal is to unlock shaders with modified bios with stock 6970 clocks.

-I'm trying to test the stability but powertune/powerplay or whatever gets in the way; the core clock doesn't stay constant at 800mhz even when I test with stock clocks. This happens in occt gpu error checking and furmark xtreme burn mode. I enabled option 2 in afterburner but it still happens. What's the best way to test the oc.

-I seem to be stable at 880core 1375ram no unlocked shaders yet. But it's been with powerplay/powertune on so I'm not sure if it's stable. No problems in occt gpu, furmark xtreme burn, or heaven benchmark. It seems too good to be true that I'm stable without a voltage increase

-tested with afterburner 2.20 beta and 2.10final.




Edited by mikami - 4/16/11 at 10:22am
post #2 of 5
did you make sure to set powertune to +20%?
post #3 of 5
Thread Starter 
thanks for the reply sexy. It wasn't showing up until I closed afterburner, weird. Is it safe to use afterburner and set powertune to 20% at once?

Also what should I set this to in afterburner: UnofficialOverclockingMode = ? 2 or 1?
Edited by mikami - 4/16/11 at 10:29am
post #4 of 5
Yes it is.
post #5 of 5
Thread Starter 
repped and thank you. any other advice on checking stabilty?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Need feedback on my oc, 6950 his reference