Overclock.net › Forums › Cooling › Water Cooling › Another annoying and repetitive tubing question
New Posts  All Forums:Forum Nav:

Another annoying and repetitive tubing question

post #1 of 4
Thread Starter 
I'm preparing to build this coming week. I'm going to do a leak test tomorrow for 24 hours or so. In series will be a HW-labs GTX360, MCP355 with XSPC res top, and Swiftech GTZ block. The tubing for the test will be 1/2"ID 3/4"OD Clearflex 60 secured at all barbs by worm-drive clamps.

My question is, when I replace that tubing for final install (only replacing because everyone says that Clearflex 60 is garbage) and I use PrimoFlex Pro LRT white tubing, should I be getting 1/2"ID or 7/16"ID? I still plan on using worm-drive clamps or at minimum small black zip ties. I get the feeling that there is no "right answer" because with clamps ID doesn't matter as much (I think) but I might be wrong.

Also, should I just hold off on the leak testing for the final tubing (to be decided as above) to try to minimize plasticizer or manufacturing residue from entering my system and being deposited in blocks, etc?

Thanks in advance
post #2 of 4
1/2"ID will be good if you use worm drive clamps. If you will use zip ties I suggest 7/16" for safety. If you fear manufacturing residue then it will be a good idea to leak test with the new tubing you will get since it is a good idea to do leak testing anytime the loop is installed. It would be a waste of time to do it with the clearflex since you would be doing it with the new tubing anyway.
Tiny Fun
(8 items)
 
4P Folding Rig 1
(16 items)
 
4P Folding Rig 2
(11 items)
 
CPUMotherboardGraphicsRAM
i7-4770K @ 4.0GHz MSI Z87I EVGA GTX 660 Ti Corsair Vengeance 16GB 
Hard DriveCoolingOSCase
Samsung 840 Pro 256GB Swiftech Apogee Drive II Windows 8 Enterprise x64 Cooler Master Elite 120 Advanced 
CPUCPUCPUCPU
AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core 
MotherboardGraphicsRAMHard Drive
SuperMicro H8QGi+-F Matrox G200eW 16x2 (32GB) Crucial Ballistix DDR3 1600MHz Crucial C300 64GB 
OSPowerCase
Linux Mint 15 Cinnamon 64-bit Enermax Galaxy Evo 1250W Spotswood Tech Tray 
CPUCPUCPUCPU
AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz 
MotherboardGraphicsRAMHard Drive
Supermicro H8QGL-IF+ Matrox G200eW Kingston Server 16x1GB DDR3 Corsair Nova 32GB 
OSPower
Linux Mint 15 Cinnamon 64-bit Cooler Master Silent Pro 1000W 
  hide details  
Reply
Tiny Fun
(8 items)
 
4P Folding Rig 1
(16 items)
 
4P Folding Rig 2
(11 items)
 
CPUMotherboardGraphicsRAM
i7-4770K @ 4.0GHz MSI Z87I EVGA GTX 660 Ti Corsair Vengeance 16GB 
Hard DriveCoolingOSCase
Samsung 840 Pro 256GB Swiftech Apogee Drive II Windows 8 Enterprise x64 Cooler Master Elite 120 Advanced 
CPUCPUCPUCPU
AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core 
MotherboardGraphicsRAMHard Drive
SuperMicro H8QGi+-F Matrox G200eW 16x2 (32GB) Crucial Ballistix DDR3 1600MHz Crucial C300 64GB 
OSPowerCase
Linux Mint 15 Cinnamon 64-bit Enermax Galaxy Evo 1250W Spotswood Tech Tray 
CPUCPUCPUCPU
AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz 
MotherboardGraphicsRAMHard Drive
Supermicro H8QGL-IF+ Matrox G200eW Kingston Server 16x1GB DDR3 Corsair Nova 32GB 
OSPower
Linux Mint 15 Cinnamon 64-bit Cooler Master Silent Pro 1000W 
  hide details  
Reply
post #3 of 4
Thread Starter 
Thanks for the heads up. So there's basically no reason to go with 1/2"ID? The versatility of the 7/16" (safety in different situations) adds more benefit than the 1/16" in diameter could ever benefit me I imagine.

Also, off topic, but nice camera kit . I used to shoot almost the same kit minus the 18-105, but the lenses were stolen so now I'm just on 18-55vr +55-200vr.
post #4 of 4
Yea, the extra little bit of ID wouldn't make much of a difference since you aren't in need of the tiny bit of flow since the pump you use can't saturate it. I actually don't shoot with that anymore, I haven't updated it. I haven't had much time to shoot so I'm down to just a 28-105 for it's macro ability and its low price and an 11-16.
Tiny Fun
(8 items)
 
4P Folding Rig 1
(16 items)
 
4P Folding Rig 2
(11 items)
 
CPUMotherboardGraphicsRAM
i7-4770K @ 4.0GHz MSI Z87I EVGA GTX 660 Ti Corsair Vengeance 16GB 
Hard DriveCoolingOSCase
Samsung 840 Pro 256GB Swiftech Apogee Drive II Windows 8 Enterprise x64 Cooler Master Elite 120 Advanced 
CPUCPUCPUCPU
AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core 
MotherboardGraphicsRAMHard Drive
SuperMicro H8QGi+-F Matrox G200eW 16x2 (32GB) Crucial Ballistix DDR3 1600MHz Crucial C300 64GB 
OSPowerCase
Linux Mint 15 Cinnamon 64-bit Enermax Galaxy Evo 1250W Spotswood Tech Tray 
CPUCPUCPUCPU
AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz 
MotherboardGraphicsRAMHard Drive
Supermicro H8QGL-IF+ Matrox G200eW Kingston Server 16x1GB DDR3 Corsair Nova 32GB 
OSPower
Linux Mint 15 Cinnamon 64-bit Cooler Master Silent Pro 1000W 
  hide details  
Reply
Tiny Fun
(8 items)
 
4P Folding Rig 1
(16 items)
 
4P Folding Rig 2
(11 items)
 
CPUMotherboardGraphicsRAM
i7-4770K @ 4.0GHz MSI Z87I EVGA GTX 660 Ti Corsair Vengeance 16GB 
Hard DriveCoolingOSCase
Samsung 840 Pro 256GB Swiftech Apogee Drive II Windows 8 Enterprise x64 Cooler Master Elite 120 Advanced 
CPUCPUCPUCPU
AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core AMD Opteron 6274 ES 2.2GHz 16-Core 
MotherboardGraphicsRAMHard Drive
SuperMicro H8QGi+-F Matrox G200eW 16x2 (32GB) Crucial Ballistix DDR3 1600MHz Crucial C300 64GB 
OSPowerCase
Linux Mint 15 Cinnamon 64-bit Enermax Galaxy Evo 1250W Spotswood Tech Tray 
CPUCPUCPUCPU
AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz AMD Opteron 6176 SE 12-Core 2.3GHz 
MotherboardGraphicsRAMHard Drive
Supermicro H8QGL-IF+ Matrox G200eW Kingston Server 16x1GB DDR3 Corsair Nova 32GB 
OSPower
Linux Mint 15 Cinnamon 64-bit Cooler Master Silent Pro 1000W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Another annoying and repetitive tubing question