Overclock.net › Forums › AMD › AMD CPUs › BSOD's, seems to be ram or driver related.....
New Posts  All Forums:Forum Nav:

BSOD's, seems to be ram or driver related.....

post #1 of 11
Thread Starter 
This has been quite the quest for the 4G.....

Of all the places I have researched for knowledge, this site is the best!!!!!!
Thanks for sharing your experiences and knowledge!!!!!!

I'm trying to get over 3.598G I keep getting BSOD, or prime gives me hardware failure errors.
I have been researching every blue screen, not always the same, but it either points to the ram, or driver. I ran memtest86, 362%coverage, (left it on went to work) no errors. I have read and tried all the overclock strategies for my 1055t, it will boot up win 7 at 3.8G and have been searching for answers on the net but crashes on prime. these are the last 4 BSOD.......

IRQ_NOT_LESS_OR_EQUAL
SYSTEM SERVICE EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
....mystery.......
DRIVER_IRQL_NOT_LESS_OR_EQUAL

Can some please help????
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
post #2 of 11
Try increasing the Vcore and Northbridge Voltage. Also, if you have a voltage setting called CPU term, make sure it's set 0.2v behind the actual Vcore. I would also test the memory using memtestx86 bootable.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #3 of 11
Thread Starter 
I'm at 1.3v in the bios for my NB. the only place I have found to read this in win 7 is by opening AOD and it reads 1.1v. Ill try upping it.

In the bios I'm @ 1.5v for the vcore but it reads 1.4-1.47 between Hwm and Cpuz.
I have pushed the HT, NB, and ram freq's and the system is fine until I hit this mark.

I have discovered my ram is the culprit. If I clock over 258x14 I get errors with memtest and windows memory tests, but not under 258x14......???? This doesnt make sense to me bc the ram will run @1713 NP @ 257x14. seems that once I get over 3.6 the system goes outta sync......is that what is happening?
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
post #4 of 11
Thread Starter 
possible hardware failure
Sumout
than
Service exception error..
vcore 1.46-1.5 in Hwm and 1.35v in bios for NB. (big frustrating sigh!!)
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
post #5 of 11
Is your ram clocked too high?
Gene-Z Dedi
(7 items)
 
Captain America
(6 items)
 
 
CPUMotherboardRAMHard Drive
i7 2600k @ 5.2 Ghz Asus Maximus IV Gene-Z Gskill 2133 4GB Caviar Black 
CoolingOSPower
Corsair H100 Arch x64 OCZ 650 Watt 
CPUCPUMotherboardGraphics
Intel Xeon E5-2650 Intel Xeon E5-2650 ASUS Z9PE-D8 WS XFX 6870 
RAMOS
32 GB Samsung Arch Nix 
  hide details  
Reply
Gene-Z Dedi
(7 items)
 
Captain America
(6 items)
 
 
CPUMotherboardRAMHard Drive
i7 2600k @ 5.2 Ghz Asus Maximus IV Gene-Z Gskill 2133 4GB Caviar Black 
CoolingOSPower
Corsair H100 Arch x64 OCZ 650 Watt 
CPUCPUMotherboardGraphics
Intel Xeon E5-2650 Intel Xeon E5-2650 ASUS Z9PE-D8 WS XFX 6870 
RAMOS
32 GB Samsung Arch Nix 
  hide details  
Reply
post #6 of 11
You are pushing an X6 with no VRM cooling? Your VRM's are probably smoking hot-that's why your CPUv is fluctuating so much.
You are probably getting errors on the IMC too.The harder you push the CPU,the IMC gets affected also,plus you are using the ref. clock to increase.Bump your CPU/NB voltage up to 1.4v,or lower the ref. clock and increase your CPU multiplier.May need to bump up your HTT and NB chipset voltage too.
Edited by Redwoodz - 4/18/11 at 8:01am
Amelia
(13 items)
 
Professional
(13 items)
 
RCPC#1
(17 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1100t MSI 890FX GD65 MSI Radeon HD5670 GSkill RipjawsX DDR3 PC3 12800 2x4GB CL8 
Hard DriveOptical DriveCoolingOS
WD Black 1TB SATA III Samsung BD Zalman 9900MAX Windows 7 64 Professional 
MonitorKeyboardPowerCase
AOC 22" LED Logitech Kingwin Lazer Platinum 500w Fractal Design R3 
Other
Samsung 470 SSD 128GB 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 960T Asus M4A88T-VEVO Asus Strix R7 370 SuperTalent Perfomance 
RAMHard DriveHard DriveOptical Drive
GSkill Snipers Monster Daytona Seagate Barracuda 500GB 7,200 RPM 16Mb cache Memorex DVD/RW 
CoolingOSMonitorKeyboard
Corsair H60 Windows 8N IBM 9494 19" LCD IBM 
PowerCaseMouseMouse Pad
Corsair GS500 In Win H-Frame Wolfking OCZ Behemoth 
Audio
JBL Creature 
  hide details  
Reply
Amelia
(13 items)
 
Professional
(13 items)
 
RCPC#1
(17 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1100t MSI 890FX GD65 MSI Radeon HD5670 GSkill RipjawsX DDR3 PC3 12800 2x4GB CL8 
Hard DriveOptical DriveCoolingOS
WD Black 1TB SATA III Samsung BD Zalman 9900MAX Windows 7 64 Professional 
MonitorKeyboardPowerCase
AOC 22" LED Logitech Kingwin Lazer Platinum 500w Fractal Design R3 
Other
Samsung 470 SSD 128GB 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 960T Asus M4A88T-VEVO Asus Strix R7 370 SuperTalent Perfomance 
RAMHard DriveHard DriveOptical Drive
GSkill Snipers Monster Daytona Seagate Barracuda 500GB 7,200 RPM 16Mb cache Memorex DVD/RW 
CoolingOSMonitorKeyboard
Corsair H60 Windows 8N IBM 9494 19" LCD IBM 
PowerCaseMouseMouse Pad
Corsair GS500 In Win H-Frame Wolfking OCZ Behemoth 
Audio
JBL Creature 
  hide details  
Reply
post #7 of 11
Thread Starter 
mos-c1's w\\80mm and a hyper 212 and a 140mm side and 2 80mm( front\\back)....idles at 17C max hits 39c, TMPN0 max 42C. @3.598...
1055t, locked at 14, ram just over 1400 (A-data 1600g)
Ht tried from just over 2000 and just under 2000 @ 1.25v
NB tried from under 2000 matching the HT to just over 2700 @1.35v
and the v core is @1.50125 in the bios but reads 1.456 in Cpuz and max 1.5 in Hwm...
Chipset V on Auto, LLC on auto, tried it on 100%......
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
post #8 of 11
LLC set to 33% or off.Your CPU/NB needs more voltage.Should be slightly lower than vcore.You should be fine up 1.45v.Keep NB around 2600MHz,and bump that chipset voltage up to 1.2v.What RAM voltage? Keep it at 1.65v to eliminate RAM issues.
Also try and run your ref. clock as high as you can,this leaves you room to adjust your CPU multipliers down.I find the 270-300 range is best.So like 300 FSB,13 CPU,8 or 9 NB,HTT 7...ram 1:2 divider etc....(examples-not exact)

oh yeah and good job for the VRM coolers
Amelia
(13 items)
 
Professional
(13 items)
 
RCPC#1
(17 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1100t MSI 890FX GD65 MSI Radeon HD5670 GSkill RipjawsX DDR3 PC3 12800 2x4GB CL8 
Hard DriveOptical DriveCoolingOS
WD Black 1TB SATA III Samsung BD Zalman 9900MAX Windows 7 64 Professional 
MonitorKeyboardPowerCase
AOC 22" LED Logitech Kingwin Lazer Platinum 500w Fractal Design R3 
Other
Samsung 470 SSD 128GB 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 960T Asus M4A88T-VEVO Asus Strix R7 370 SuperTalent Perfomance 
RAMHard DriveHard DriveOptical Drive
GSkill Snipers Monster Daytona Seagate Barracuda 500GB 7,200 RPM 16Mb cache Memorex DVD/RW 
CoolingOSMonitorKeyboard
Corsair H60 Windows 8N IBM 9494 19" LCD IBM 
PowerCaseMouseMouse Pad
Corsair GS500 In Win H-Frame Wolfking OCZ Behemoth 
Audio
JBL Creature 
  hide details  
Reply
Amelia
(13 items)
 
Professional
(13 items)
 
RCPC#1
(17 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1100t MSI 890FX GD65 MSI Radeon HD5670 GSkill RipjawsX DDR3 PC3 12800 2x4GB CL8 
Hard DriveOptical DriveCoolingOS
WD Black 1TB SATA III Samsung BD Zalman 9900MAX Windows 7 64 Professional 
MonitorKeyboardPowerCase
AOC 22" LED Logitech Kingwin Lazer Platinum 500w Fractal Design R3 
Other
Samsung 470 SSD 128GB 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 960T Asus M4A88T-VEVO Asus Strix R7 370 SuperTalent Perfomance 
RAMHard DriveHard DriveOptical Drive
GSkill Snipers Monster Daytona Seagate Barracuda 500GB 7,200 RPM 16Mb cache Memorex DVD/RW 
CoolingOSMonitorKeyboard
Corsair H60 Windows 8N IBM 9494 19" LCD IBM 
PowerCaseMouseMouse Pad
Corsair GS500 In Win H-Frame Wolfking OCZ Behemoth 
Audio
JBL Creature 
  hide details  
Reply
post #9 of 11
Thread Starter 
Quote:
Originally Posted by Redwoodz View Post
LLC set to 33% or off.Your CPU/NB needs more voltage.Should be slightly lower than vcore.You should be fine up 1.45v.Keep NB around 2600MHz,and bump that chipset voltage up to 1.2v.What RAM voltage? Keep it at 1.65v to eliminate RAM issues.
Also try and run your ref. clock as high as you can,this leaves you room to adjust your CPU multipliers down.I find the 270-300 range is best.So like 300 FSB,13 CPU,8 or 9 NB,HTT 7...ram 1:2 divider etc....(examples-not exact)

oh yeah and good job for the VRM coolers
Those are not easy to put on...especially when u dont have still hands!!! lol

When u said I should be fine up to 1.45v, u referring to NB or CPU?
HWM vcore max hits 1.52v, 1.504v cpuz (still headroom?)
my NB is set at 1.39....it turns red when I got to 1.4!!! ???
Chip 1.2
Dram 1.65
hardware failure on prime
Edited by brewermoe - 4/18/11 at 9:41am
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
post #10 of 11
Thread Starter 
Perhaps this board has hit its limit?
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
The uPgrader!!
(19 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8150 @4.56G ASUS Crosshair V Formula Gigabyte Radeon HD 6850  Gigabyte Radeon HD 6850  
RAMHard DriveHard DriveHard Drive
RipJaws F312800CL9D 4X4G Samsung 840 Pro 256G ST3500418AS ST2000DL0039Vt 
Optical DriveCoolingOSMonitor
LitOn iHAS424 H60 WIN XP\WIN 7 64BIT Gateway 24 
MonitorKeyboardPowerCase
"NEC 17" Logitech Wave Cordless OCZ FATALITY 550 CM690 II Advanced 
Mouse PadAudio
Logitech Lx8 Logitech 7.1 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › BSOD's, seems to be ram or driver related.....