Originally Posted by General_Chris
i dont mess with the IMC voltage though i leaved that Auto did it passed also on linx prime on 3.6?
Still mobo shows the current voltage even if it is auto!
plz can u check that for me that on which voltage your imc is running on 3.8Ghz!
i was testing with linX 0.6.4 and prime95! Now testing with IBT too! linX and IBT both are same in way.
and yes my pc is stable with 3.6ghz and 3.8ghz at voltage shown in the first post! but those are high and i want to hit 4ghz!
does it make difference if i use 200x19 or 190x200! its confusing me!
when i go with 190 it under-clocks my ram a lil bit i dont want that!
my rams specs are to work with 1600mhz with 8-8-8-24 at 1.65!
then why should i change that! mobo gives me 1600mhz either with 160bclk or 200 bclk so i m using 200 for most of my settings?
like 3.6: 200*18, 3.8: 200*19
but i m not able to stable is at 4.0:200*20.
should i go with 190*21? will it make any difference? :damn i hv got alot of questions plz dont mind:Edited by summersyed - 4/21/11 at 4:06am