Overclock.net › Forums › Intel › Intel CPUs › Q6600 overclock to 3.0 - 3.2 Ghz
New Posts  All Forums:Forum Nav:

Q6600 overclock to 3.0 - 3.2 Ghz - Page 10

post #91 of 94
Found a template for your board. And filled in what I know should be good


GIGABYTE GA X48T DQ6 Clock Settings

MB Intelligent Tweaker (MIT)
Robust Graphics Booster...........: Auto
CPU Clock Ratio...................: 9
CPU Frequency.....................: 3600MHz
CPU Host Clock Control............: Enabled
CPU Host Frequency(Mhz)...........: 400
PCI Express Frequency (Mhz).......: 100
C.I.A.2...........................:
Performance Enhance...............: Normal
System Memory Multiplier (SPD)....: 1:1 (Or what your mem is)
Memory Frequency(Mhz).............: (stock)
DRAM Timing Selectable ...........: Enabled
Standard Timing Control
CAS Latency Time (tCL)............: Stock (Try to loosen it if unstable to isolate mem as a problem. This goes for the 3 below this also)
DRAM RAS# to CAS# (tRCD).........: Stock
DRAM RAS# Precharge (tRP).........: Stock
Precharge Delay (tRAS)............: Stock
Advanced Timing Control
ACT to ACT Delay(tRRD)............:
Rank Write to READ Delay (tWTR)...:
Write To Precharge Delay (tWR)....:
Refresh to ACT Delay (tRFC).......:
Read To Precharge Delay (tRTP)....:
Static tREAD Value (tRD)..........: 10
Static tREAD Phase Adj............:
Command Rate (CMD)................: 2T
Clock Driving and Skew Control
CPU/PCIEX Clock Driving Control...:
CPU Clock Skew Control............: Normal
(G)MCH Clock Skew Control.........: Normal
System Voltage Control () = Base Voltages
DDR3 OverVoltage Control...(1.50v): Stock
PCI-E OverVoltage Control.,(1.50v): Stock
FSB OverVoltage... 65nm = 1.25v..+: 1.3v
(G)MCH OverVoltage Control,(1.25v): 1.4v (Also try 1.5v. The X48 can handle it)
CPU GTLREF1 Voltage*.......(67%)..: Auto
CPU GTLREF2 Voltage*.......(61%)..: Auto
Loadline Calibration..............: Enabled
CPU Voltage Control...............: Enabled
Normal CPU Vcore..................: 1.5 or what you need
Note: * Hidden Features Press [CTRL] + [F1] from main Menu to Access + FSB 45nm= 1.15v
Advanced Bios Features
CPU Multi-Threading...............: Enabled
Limit CPUID Max to 3..............: Disabled
No-Execute Memory Protect.........: Disabled
CPU Enhanced Halt(CIE)............: Disabled
CPU Thermal Monitor 2.............: Enabled
CPU EIST Function.................: Disabled
Virtuaalization Technology........: Enabled
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #92 of 94
helipilot

Hey, why not start a poll in this thread, where you ask if people believe you will make it to 3.6GHz or not
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #93 of 94
Thread Starter 
Good idea
post #94 of 94
Thread Starter 
I give up...

Even pulling back to 3.42 Ghz settings is crashing on Windows now...

Thanks for your help guys.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Q6600 overclock to 3.0 - 3.2 Ghz