Overclock.net › Forums › AMD › AMD CPUs › FSB jumps up and down during Mafia II benchmark
New Posts  All Forums:Forum Nav:

FSB jumps up and down during Mafia II benchmark

post #1 of 2
Thread Starter 
I'm wondering if anyone's having the same issue: i tried to run the Mafia II benchmark in window mode to see how cpu and gpu are loaded, and to my surprise i saw that fsb(which is set to 267mhz normally) jumps from 190-to-270, which , i think, is very strange. Q&Q and such are all disabled, but even if they were enabled, they're basically affecting the multiplier only, fsb is supposed to stay the same all the time..
Also, GTX 580 is nowhere near 100% load either, it around 50-60% all the time.
In other benches everything's fine with the loads.

I use Afterburner to monitor GPU and Evverest for CPU\\fsb.
post #2 of 2
I get that sometimes, it is a bug with EVEREST and the bus clock sometimes reports incorrectly (lower) during load
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › FSB jumps up and down during Mafia II benchmark