Overclock.net › Forums › AMD › AMD Motherboards › AMD BIOS › Foxconn A6GMV
New Posts  All Forums:Forum Nav:

Foxconn A6GMV

post #1 of 3
Thread Starter 
i looked at the notes for the latest bios and its supposed to support core unlocking is there a bios mod to be able to get ACC or some thing simmilar to unlock the L3 catch of a cpu
post #2 of 3
ı've got same motherboard and i was thinkin about getting a phen 555 & unlock cores.then ı found latest bios for this mb whic should be "A11F1P04" and instructions says it supports core release but ;
" only the MB whose PCE version is 1.1 or higher can support core releaser function"
now ı am flashing my bios to this version.
post #3 of 3
Thread Starter 
Quote:
Originally Posted by technocan View Post
ı've got same motherboard and i was thinkin about getting a phen 555 & unlock cores.then ı found latest bios for this mb whic should be "A11F1P04" and instructions says it supports core release but ;
" only the MB whose PCE version is 1.1 or higher can support core releaser function"
now ı am flashing my bios to this version.
well im not sure how the unlock function works on this mobo as i have yet to use it but in theory it should work

but take note the P-II -555 is 80W dual core this mobo is only up to 95W CPU altho it will take higher than 95w that is its maximum supported safe wattage

so unlocking the P-II 555 will probably take it to 125W+ so if you do unlock it on this motherboard i do advise against overclocking after you unlock the cpu

my A-II 640 @ 3.6 1.45-1.5v is some thing like 140W+ & 95W at stock
i have invested in some coolers for the mosfets but i would suggest a better motherboard as this board is not the best quality
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD BIOS
Overclock.net › Forums › AMD › AMD Motherboards › AMD BIOS › Foxconn A6GMV