Overclock.net › Forums › Intel › Intel - General › Think my Q6600 can handle 475 FSB?
New Posts  All Forums:Forum Nav:

Think my Q6600 can handle 475 FSB? - Page 2

post #11 of 12
Quote:
Originally Posted by Lord Xeb View Post
I am thinking of pushing my chip to 3.8GHz and see what I can do. I know if I do Intel Burn Test at those clocks I am going to insta-crash from heat, but P95 should be fine. At 3.6 1.472v (think I can go lower) I am pushing 62C average P95.

Thoughts on the FSB? Think my Q6600 can handle 1900 FSB?

If so what do I need to do?

Here is what I have right now (for 3.6GHz)

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ...........................:8
Fine CPU Clock Ratio.....................:
CPU Frequency .............................:3.6
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 450
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 ...........................................:[Disabled]

DRAM Performance Control
Performance Enhance...................: [Standard]
X.M.P……………………………………… ………..: Disabled
(G)MCH Frequency Latch...............: 400
System Memory Multiplier ..............:[2.00D]
Memory Frequency (Mhz) ...............:1066 900
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................: 5
tRCD ......................................... 5
tRP'........................................... 5
tRAS.......................................... 15
Advanced Timing Control
? Haven;t changed anything in here
Driving Strength Profiles
Same here
Motherboard Voltage Control
Load Line Calibration........................[enabled]
Voltage Type.………... [manual
CPU
CPU Vcore….……….........................: 1.50625 (I think)
CPU Termination…..... ......................:1.34
CPU PLL………………….....................:1.57
CPU Reference.…………........................:0.7 60V [Auto]
MCH/ICH
MCH Core……………....1.4
MCH Reference….…….Auto
MCH/DRAM Ref.…...... auto
ICH I/O……………….....1.570V
ICH Core…………...……1.200V
DRAM
DRAM Voltage ……....2.1
res is auto

Also just for giggles I tried to run Intel Burn Test (at settings I thought would work) and experienced a freeze... my raid 1 ended up being put into the verify state, chrome's cache and settings got corrupted and all my gadgets were gone XD (fixed btw)
Sorry for the double post but seriously... THE ****!? O_o
     
CPUMotherboardGraphicsRAM
Intel Core i5-6300HQ Dell Proprietary 4GB Nvidia GTX 960M Samsung 12GB (1x8GB 1x4GB) DDR3L 1600 MHz 
Hard DriveHard DriveCoolingOS
256GB SanDisk M.2 SSD 1TB HGST 7.2k HDD Custom Cooling by Dell Solutions Windows 10 Home 64-Bit 
MonitorKeyboardPowerMouse
15.6" 1920x1080 IPS Screen Dell 130w PSU Logitech G602 Wireless 
Mouse Pad
Xtrac 'Ripper' Mouse Pad 
CPUMotherboardGraphicsRAM
Intel Core i7-2760QM Toshiba Qosmio X775 Nvidia 1.5GB GTX 560M 8GB DDR3 1333 
Hard DriveOptical DriveCoolingOS
120GB Samsung 830 SSD + 1TB HGST 7200RPM HDD CD/DVD-RW Stock Windows 10 Home 64-Bit 
MonitorKeyboardPowerMouse
17.3" - 1600x900 Standard backlit 180w Power Adapter Logitech G500s 
Audio
Harmon/Kardon Onboard 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5-6300HQ Dell Proprietary 4GB Nvidia GTX 960M Samsung 12GB (1x8GB 1x4GB) DDR3L 1600 MHz 
Hard DriveHard DriveCoolingOS
256GB SanDisk M.2 SSD 1TB HGST 7.2k HDD Custom Cooling by Dell Solutions Windows 10 Home 64-Bit 
MonitorKeyboardPowerMouse
15.6" 1920x1080 IPS Screen Dell 130w PSU Logitech G602 Wireless 
Mouse Pad
Xtrac 'Ripper' Mouse Pad 
CPUMotherboardGraphicsRAM
Intel Core i7-2760QM Toshiba Qosmio X775 Nvidia 1.5GB GTX 560M 8GB DDR3 1333 
Hard DriveOptical DriveCoolingOS
120GB Samsung 830 SSD + 1TB HGST 7200RPM HDD CD/DVD-RW Stock Windows 10 Home 64-Bit 
MonitorKeyboardPowerMouse
17.3" - 1600x900 Standard backlit 180w Power Adapter Logitech G500s 
Audio
Harmon/Kardon Onboard 
  hide details  
Reply
post #12 of 12
The FSB is the easy part, its the CPU GTL's you gotta worry about. I could run 7x500 all day but at 4ghz even with enough voltage i couldn't get it stable. mainly cause i was too lazy to play with it for a while

EDIT: get dem refs off auto & do some OC'in
The 775 Legend
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 @ 5.8 -- 1.736v Rampage Formula! GTX550ti Vmod! OCZ D9's @ 1200+ cas 5 
OSMonitorPowerCase
XPEEEEEEEEEEEEEEEEEEEEEEE XGA 800x600 TR2-RX 850W Neoprene sheet 
  hide details  
Reply
The 775 Legend
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 @ 5.8 -- 1.736v Rampage Formula! GTX550ti Vmod! OCZ D9's @ 1200+ cas 5 
OSMonitorPowerCase
XPEEEEEEEEEEEEEEEEEEEEEEE XGA 800x600 TR2-RX 850W Neoprene sheet 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Think my Q6600 can handle 475 FSB?