+1 from me, 380 is pretty sweet
Originally Posted by wumpus
my this board is really hard to get stable at ~5500, purely because of the way the GTL refs are setup in the BIOS....its stupid.
Had settings that were known stable up to 585 & it wouldnt pass @ 5.6 (560x10)
all CPU refs....makin me mad lol
you still have a pretty good chance....took me 600FSB to match your 520 on that mobo, purely because this one has a really really loose NB
cant wait to see what you got!
EDIT: plus your D9's are better than mine
unless your pumpin over 2.5v then maybe not
Im saying nothin!!
nah, actually they were needing 2.3 - 2.4vddr to run 624Mhz @ 5-4-4 on that 5:6 divider with the e8400, but using exact same settings with the e8600 apart from the slight increase on the multi and vcore gives constant bsods under load and 'not convergant in square' with spi32m
Even a bump in nb doesnt help.
I guess these sticks are starting to degrade now though, they were my first ever set of D9 and have worked flawlessly, never needing 2.5v for 650Mhz+.
But now theyre starting to struggle around 630Mhz and with this chip need more vddr to get those 5-4-4 timings
I Got some slight improvements last night, nothing special though, will upload later