Overclock.net › Forums › Cooling › Air Cooling › Advice needed on heatsink fans!
New Posts  All Forums:Forum Nav:

Advice needed on heatsink fans!

post #1 of 5
Thread Starter 
Hello guys,

I have read the guides and everything I can find but I still need help deciding a few things.

I have a Delta AFC1212D-PWM fan, and a few Yate loon fans.
My questions are...

1. Should I use the delta fan + one yate loon fan for push/pull, or should I use two yate loon fans?
2. Also, what would happen if I use the delta fan with the yate loon fan on my heatsink?
3. Finally, would using one delta fan vs two yate loon fans since the delta fan is way stronger.


Thanks in advance for the advices!!
I appreciate all your help.
post #2 of 5
What Yates do you have? Might make a difference, might not. I would use the Delta for CPU, Yates for case fans.
post #3 of 5
Thread Starter 
I have the Yate Loon D12SH ones (high cfm) from dangerden.com
post #4 of 5
The single Delta will push more air 113 CFM @ 47dba

The High Speed Yates are OK too. If you are looking for a quieter solution, use the Yates.
post #5 of 5
Thread Starter 
I see, ty for the help.

What happens if I use the delta + yate loon together on the heat sink, would using two different fans have any harm?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Advice needed on heatsink fans!