Originally Posted by catcherintherye
It doesn't look good for watercooling. There is only 1 180mm fan at the top, can't mount a decent rad up there.
lol really? You can remove that 180mm (it's slow anyways) and have room for a 360 rad as long as you don't have a 5.25 drive up top. Of course this requires cutting the top panel, but that's easily done.
You can also drill out the rivets holding the 3.5 in bays in the bottom compartment and fit at least two 240 rads sandwiched or against each side panel down there.
If you really wanted, you could also mod the front 5.25 bays (cut the bottom out from the bracket and remove the 3.5 cage) and fit a vertical 240 as well. That's a possible total 1080mm of radiator cooling length, all internal; impressive imo.
It's very, very well suited to water cooling after some easy mods.
Not exactly how I'd set it up, but an Example showing good water cooling ability
It looks like you could possibly squeeze a 480 up top if you really wanted to. Here is a 360 and it looks like if you butt it close to the rear, you have room for another fan toward the front. That would make it an even 1200mm of total possible radiator length internally mounted...:
Edited by whiteslashasian - 4/26/11 at 8:06am