lemans81

I have two questions on the 1Gb Kit (2x512Mb) PC2 5400 3-3-3-8 D9GMH

One is are these going to overclock well(I know they are d9's and that d9's overclock well)? I know you guys only sell them but have you tested to see where they can go, or anyone who has bought them know??

Two is do you guys sell any kind of heatsinks for them, I was hoping to save a little shipping by buying them together?

__________________

prosser13

I take it you mean the Team Xtreem stuff?

My stuff overclocks excellently, and my G.Skill HZ with D9s also overclocked very well

Don't bother with heatsinks - they look fancy, but they don't help at all

__________________

The Duke

If they are the early batch of 667 D9s GMH, many seemed to run up in the 900ish range. The later ones even better... The Special Ballistix 667 OCed as well as the 800.
Not all D9s ICs are the same regardless of the "GMH" or what ever... earlier did well, mid stream better and later ones even more. A lot also depended on the binning too.
Team usually uses premo ICs BTW

__________________

prosser13

http://www.nintek.com.au/x/scripts/p...idproduct=6436

__________________

lemans81

Any clues what timings I will need to have to get them up to 950mhz or so.(if they go that far). Also will these 2x512 oc as well as the 2x1gb sticks?

__________________

Blameless

Same PCB + half the number of the same chips. So, yes, they should tend to OC just as well, if not slightly better.

950MHz on Team D9GMH...4-4-4-12-T2, 2.1 to 2.2v, give or take.