squwish

Direction of flow?

PUMP-CPU-GPU-Radator?

__________________
My CPU : Athlon64 3400+ Venice @ 2.68Ghz

Quote:

BUT high HT/LDT doesn't help you worth a crap. its like a toilet, you're going to crap in something and its going to go down. if you get a bigger toilet, it can hold a lot more crap, but if its only you crapping on it, then it isn't going to move the crap any faster if you have a smaller toilet or a bigger toilet

Hey, what can I say, I love tennis!

ira-k

No go res-pump-rad-cpu-gpu.............That way the coolest water goes to the cpu first...

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

DuckieHo

Doesn't matter too much really since the water temperature delta is less than 2C. It is more important to have good routing to improve waterflow. Aim for less amount of tubing with fewer bends.

pauldovi

Actually the water barely changed .2C throughout its entire venture through the typical watercooling loop. Therefore, the order of the loops has little to no effect on the cooling properties.

__________________

ira-k

Doesn't matter if it's 2 or .2 or 4 or 5C, I'm going to run the coolest water possible through the CPU block first since that is my primary concern, Oc'ing the CPU...

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

pauldovi

The temperature difference of the CPU will be negligible and most likely within the error of your temperature diodes. There are other ways to get a better core temperature.

__________________

ira-k

Well you have made me curios now...Phase, pelt/tec, dry ice, saline, rad in a ice bucket? What?....

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

pauldovi

Larger radiator, induced turbulence, higher CFM fans on the radiator, lap the heatsink / cpu, higher latent heat coolant, high thermally conductive surface, ect, ect, ect.

__________________

ira-k

Oh OK, I already knew all that.... I thought you knew of a trick...Thank's anyway....

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**