Martinm210

Update 5-11-2008


Added:
D-Tek Fuzion V2 - 3.6mm Nozzle
D-Tek Fuzion V2 - 4.4mm Nozzle
D-Tek Fuzion V2 - 5.5mm Nozzle
D-Tek Fuzion V2 - 6.3mm Nozzle
D-Tek Fuzion V2 - Quad Nozzle
D-Tek Fuzion V2 - Stock
Thermalright XWB-01
XSPC Edge Acrylic CPU Prototype
XSPC Razor 3870
XSPC X20 Delta Chipset
Danger Den CPX-Pro

Disclaimer:
This spreadsheet shall be used for educational purposes only! Use at your own risk!

V2.6 Interface:


V2.6 Interactive System Chart(Updates realtime per interface input):


Version 2.8 compontents and pumps included:

CPU Blocks:
Aqua Extreme MP-05 N3 (NOT TESTED! ERROR!)
Aqua Computers Double Impact
Danger Den MC-TDX
Danger Den TDX, Nozzle #1
Danger Den TDX, Nozzle #2
Danger Den TDX, Nozzle #3
Danger Den TDX, Nozzle #4
Danger Den TDX, Nozzle #5
Danger Den RBX-1 (NOT TESTED! ERROR!)
D-Tek Fuzion V1 - 3.6mm Nozzle + Washer
D-Tek Fuzion V1 - 4.4mm Nozzle + Washer
D-Tek Fuzion V1 - 5.5mm Nozzle + Washer
D-Tek Fuzion V1 - 6.3mm Nozzle + Washer
D-Tek Fuzion V1 - Quad Nozzle + Washer
D-Tek Fuzion V1 - Stock + Washer
D-Tek Fuzion V1 - Stock
D-Tek Fuzion V2 - 3.6mm Nozzle
D-Tek Fuzion V2 - 4.4mm Nozzle
D-Tek Fuzion V2 - 5.5mm Nozzle
D-Tek Fuzion V2 - 6.3mm Nozzle
D-Tek Fuzion V2 - Quad Nozzle
D-Tek Fuzion V2 - Stock
D-Tek Whitewater LE (NOT TESTED! ERROR!)
EK Supreme
Stinger V8
Swiftech Apogee (NOT TESTED! ERROR!)
Swiftech Apogee GT (NOT TESTED! ERROR!)
Swiftech Apogee GTX (NOT TESTED! ERROR!)
Swiftech MCW-6002 (NOT TESTED! ERROR!)
Swiftech Storm (NOT TESTED! ERROR!)
Thermalright XWB-01
XSPC Edge Acrylic CPU Prototype
XSPC X2O Delta CPU V2

GPU Blocks:
Danger Den IONE 8800GT/GTS G92
Danger Den 8800GTX
Danger Den Maze 5
D-tek Fuzion GFX
EK FC-3850/3870
EK FC-8800 (NOT TESTED! ERROR!)
EK FC-88 (G92) (8800GT)
Swiftech MCW-60
Swiftech Stealth Rev2 (NOT TESTED! ERROR!)
XSPC Razor 3870

Chipsets:
Danger Den Maze 4 (NOT TESTED! ERROR!)
Danger Den MPC-680i
Danger Den MPC-Universal
EK NB-S-Max
EK NF4 Rev1.1 (NOT TESTED! ERROR!)
Swiftech MCW-30
XSPC X20 Delta Chipset

Mosfets:
EK Mosfet Asus 3a

Fittings & Tubing:
Elbow 1/2" Nylon
Elbow DD Derlin 90
Elbow DD Acrylic 90
Elbows Copper 1/2"-5/8" Barb
Reservoir (1/2" Barb)
T (1/2" Nylon Fitting)
T (5/8" Nylon Fitting)
DD Delrin Tee
DD Acrylic Tee
Tee Copper 1/2" 5/8" Barb
Tubing 10' 3/8" ID Tubing Tested
Tubing 10.16' 7/16" Tubing Tested
Tubing 10.58' 1/2" Tubing Tested

Radiators:
The Feser Company X-Changer 120.3 (PROTYPE ONLY)
Heatercore '77 Bonnie
HW Labs BI GTS240 (NOT TESTED! ERROR!)
HW Labs BIX 120 or 240 (NOT TESTED! ERROR!)
HW Labs BIX 360 (NOT TESTED! ERROR!)
HW Labs 480 GTX
Swiftech MCR-120 QP (NOT TESTED! ERROR!)
Swiftech MCR-220 QP (NOT TESTED! ERROR!)
Swiftech MCR-320
Thermochill PA 120.2 (NOT TESTED! ERROR!)
Thermochill PA 120.3
Thermochill PA160 (NOT TESTED! ERROR!)
XSPC RS120
XSPC RS240
XSPC RS360

Misc:
DigiFlow 8000T Flow Rate Meter
Swiss Flow SF800

Pumps:
Alphacool AP1510, 24V
Alphacool AP1510, 21V
Alphacool AP1510, 18V
Alphacool AP1510, 15V
Alphacool AP1510, 12V
AquaExtreme 50Z (NOT TESTED! ERROR!)
Danger Den CPX-1 (NOT TESTED! ERROR!)
Danger Den CPX-Pro
Eheim 1048 (NOT TESTED! ERROR!)
Eheim 1250 / Hydor L30 (NOT TESTED! ERROR!)
Hydor L20 (NOT TESTED! ERROR!)
Iwaki MD20Z (50Hz/220V) (NOT TESTED! ERROR!)
Iwaki MD20Z (60Hz/115V or 220V)(NOT TESTED! ERROR!)
Iwaki MD30Z (50Hz/220V)(NOT TESTED! ERROR!)
Iwaki MD30Z (60Hz/115V or 220V)(NOT TESTED! ERROR!)
Iwaki RD-20, 24V (NOT TESTED! ERROR!)
Iwaki RD-30, 24V
Iwaki RD-30, 21V
Iwaki RD30, 18V
Iwaki RD30, 15V
Iwaki RD30, 12V
Laing D5 Vario, Setting 5, 24V, MCP655 (Need Retesting! ERROR!)
Laing DDC-1 18W (Stock)(NOT TESTED! ERROR!)
Laing DDC-1 18W (w/Alphacool Pro-Res Top)(NOT TESTED! ERROR!)
Laing DDC-1 18W (w/Alphacool Pro-Top)(NOT TESTED! ERROR!)
Laing DDC-1 9W (Stock)(NOT TESTED! ERROR!)
Laing DDC-1 9W (w/Alphacool Pro-Res Top)(NOT TESTED! ERROR!)
Laing DDC-1 9W (w/Alphacool Pro-Top)(NOT TESTED! ERROR!)
Laing DDC-2 (w/DDCT-01s top)(NOT TESTED! ERROR!)
Laing DDC-2(Stock)(NOT TESTED! ERROR!)
Laing DDC-3.1 (stock)(NOT TESTED! ERROR!)
Laing DDC-3.2 (stock)
Laing DDC-3.2 (w/Alphacool Plexi Top) Top Inlet
Laing DDC-3.2 (w/Alphacool Reservoir Top)
Laing DDC-3.2 (w/Danger Den Top) Top Inlet
Laing DDC-3.2 (w/EK G1/4 X-Top)
Laing DDC-3.2 (w/EK G3/8 X-Top)
Laing DDC-3.2 (w/Koolance Top) Top Inlet
Laing DDC-3.2 (w/OCLabs XPTop)
Laing DDC-3.2 (w/Petra DDCT-01s Top)
Laing DDC-3.2 (w/XSPC DDC Top)
Laing DDC-3.2 (w/XSPC Reservoir Top)
Sicce Nova 800(NOT TESTED! ERROR!)
Swiftech Apogee Drive (MCP355 w/ Apogee)(NOT TESTED! ERROR!)
XSPC Dual Bay Reservoir Pump


DISCLAIMER/ACCURACY

For educational purposes only, use at your own risk!

There is far to many variables to mention, but results are often 20% in error. Viscosity from coolants added like ethelyne glycol add to the restriction and reduce pump efficiency. Different voltages from power supplies can increase or decrease performance from those tested results. I've also noticed 5% or more varience in the same exact product just from manufacturing differences, so you have to understand this is just a really rough estimate.

Attached Files

MartinsWaterCoolingFlowRateEstimatorv2_9.zip (311.6 KB, 499 views)

CrazyJoe

Excellent work !!!

Reps gallore !

__________________
Old enough to know better ... still young enough not to let that stop me !

Martinm210

Thanks!

Just trying to make sense and have some fun with this stuff, hope it's a usefull tool.

Dryadsoul

Great job, thanks.

Now that the weather is co-operating I should be able to get that V8
headed your way tomorrow or Tuesday.

__________________

Martinm210

Great, you have PM, thanks!

blade19

wow dude, amazing work! rep+ for sure - maybe you could add some lower-end stuff too, just to make everybody (except me...) feel better about their setups? lol

__________________
sigh. personality this.
win thread 1

ira-k

Very Nice....Thanks.......Crap I cant get it to work, I guess I have to have Excel...

__________________
...***Beware all ye Men born of Woman, beware the Hemogoblins***...
**E8600 @ 5751Mhz ***OCN Water Cooling Club And Picture Gallery ***150 Opty @ 3242Mhz **

Martinm210

You do for the good graphics and automatic charting, but it appears I can export to a webpage. Fairly plain, but it does spit out a flow rate:

http://webpages.charter.net/matejsek...eEstimator.htm

ira-k

Thanks...I bookmarked it I'll check it out later it says I have to use IE to see the page.... I think I still have IE somewhere in My Documents...I want to play with it...

__________________
...***Beware all ye Men born of Woman, beware the Hemogoblins***...
**E8600 @ 5751Mhz ***OCN Water Cooling Club And Picture Gallery ***150 Opty @ 3242Mhz **

Martinm210

I'm up for just about anything, the only thing I need is either a curve to calculate an equation from OR the part to test myself.

Chicken flavor of Cup-O-Noodles is getting old, so I won't be buying any new parts anytime soon