Done from building my WCing in new case (no 56KB) - Page 4 - Overclock.net

Rick Arter · 11-08-07

Sweet rig. I like the color combo and the attention to detail.

GTT · 11-08-07

Quote:

Originally Posted by Rick Arter

Sweet rig. I like the color combo and the attention to detail.

I wanted to make it all red, but the coolant the i want it was sold out.
I'm glad you like the colors, thanks

**dr4gon** · 11-08-07

Quote:

Originally Posted by GTT

lets see some pictures & temp

. good luck with that.
which one you gonna get the GTX or the GTS ?

I got it (GTX) already, just dont have time to install it.... I'm counting down the days....

It's been cleaned and leak tested and is ready to go once I get a chance. You can be sure I will get pics!

GTT · 11-08-07

Quote:

Originally Posted by dr4gon

I got it (GTX) already, just dont have time to install it.... I'm counting down the days....

It's been cleaned and leak tested and is ready to go once I get a chance. You can be sure I will get pics!

Nice

Just my 2 cents for you, if you get it with Danger den high flow fitting "THIS ONE", don't over tight it, becuase it will leak. Usually tightening it with hand is enough.
I'm telling you this becuase everytime I over tight it. it leak.

**dr4gon** · 11-08-07

Quote:

Originally Posted by GTT

Nice

Just my 2 cents for you, if you get it with Danger den high flow fitting "THIS ONE", don't over tight it, becuase it will leak. Usually tightening it with hand is enough.
I'm telling you this becuase everytime I over tight it. it leak.

thanks yeah you are squishing the poor liitle o-ring. I'm surprised I dont have any leaks right now, almost what 2-3 months running and not a leak, and I really really tightended those barbs down .... which I know isn't good but it made me nervous.... Not going to loosen them now

.

And I was actually thinking about replacing everything with EK barbs which have a little notch for the oring to sit in so when tightening it it doesn't deform and cause a leak.

But thanks for the suggestion. I'm still very scared of a leak

.

GTT · 11-08-07

Quote:

Originally Posted by dr4gon

thanks yeah you are squishing the poor liitle o-ring. I'm surprised I dont have any leaks right now, almost what 2-3 months running and not a leak, and I really really tightended those barbs down .... which I know isn't good but it made me nervous.... Not going to loosen them now

.

And I was actually thinking about replacing everything with EK barbs which have a little notch for the oring to sit in so when tightening it it doesn't deform and cause a leak.

But thanks for the suggestion. I'm still very scared of a leak

.

You should be scared

so you can get it done perfect.
good luck

**ira-k** · 11-08-07

All I do is take off the o-rings and use some red Permatex hi temp RTV sealant on about he top 2/3's of the barb, screw it in real snug and let it cure at least a day...You can tighten them down all the way like that , they wont leak when they are in tight.Just don't back them out after its cured or it will break the seal....You have to be careful doing that in plexi pieces though they can crack out...You need to clean the barb off with alcohol first to so there is no machining oils on it...I noticed you were using de-natured alchol, I really like that and acetone to, it cleans metal well...

GTT · 11-09-07

Quote:

Originally Posted by ira-k

All I do is take off the o-rings and use some red Permatex hi temp RTV sealant on about he top 2/3's of the barb, screw it in real snug and let it cure at least a day...You can tighten them down all the way like that , they wont leak when they are in tight.Just don't back them out after its cured or it will break the seal....You have to be careful doing that in plexi pieces though they can crack out...You need to clean the barb off with alcohol first to so there is no machining oils on it...I noticed you were using de-natured alchol, I really like that and acetone to, it cleans metal well...

Thanks for the info REP+

Blowie · 11-10-07

quad port

can someone explain this ? does this come standard with the FuZion or do you have to order this part ?

Blue_Fire · 11-10-07

it comes with it. At pdxlan 10 we were able to pull about 10c more off of a qx6700 using as Cremeic(no set up time) and somthing to route the water inside the block.

		Overclock.net - Overclocking.net > Cooling > Water Cooling
Done from building my WCing in new case (no 56KB)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)