Ross1308

Ok guys ive kinda made up my mind of what i want to go for.

D-Tek Fuzion CPU Block
Black Ice GT Stealth II 240mm Radiator
x2 Xilence Red Wing 14000Rpm 120mm Fan's
12V Laing DDC-1T Pro w/XSPC Delta Pump Top
Danger Den Filport (Silver)
1/2" Clear High Flex Hose (XSPC) (2 Meters)
Mikalor Wormdrive Clip 1/2" (10 Pack)
Feser One Cooling Fluid - UV BLUE (1 Litre)

Thats is pretty Much, any other recomendations or if i am missing somthing please say somthing.

__________________

Overclock.net PS3 Owner's Club
Join Teh Clubz I Haz Free Cookiez

ChielScape

get a little more tubing. other than that, looks good.
a 360 rad will keep your temps from spiking as much though, and you could later decide to add your GPU to the loop without killing your temps.

__________________
Bigger = better, except for transistor size.
480GTX Club

nate911

How much CFM do those fans push? I'd reccomend you either get some Panaflos or Yate Loons.
This pump is recommended a lot around here.
For a CPU only loop, that rad will be fine, but if you want to add on, you may want to get a bigger one.

__________________
CPU-Z Validation at 3.4Ghz! 10749 in 3DMark06! | P4885 in 3DMark Vantage
Aoccdrnig to rscheearch at Cmabrigde Uinervtisy, it deosn't mttaer in waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht the frist and lsat ltteer be at the rghit pclae. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe.

ChielScape

the DDC pump he listed is almost identical to the D5 in terms of performance, at a smaller size.

__________________
Bigger = better, except for transistor size.
480GTX Club

nate911

Ok, cool. I don't know much about WC, didn't know about that pump and how it performed. Thanks for the correction

__________________
CPU-Z Validation at 3.4Ghz! 10749 in 3DMark06! | P4885 in 3DMark Vantage
Aoccdrnig to rscheearch at Cmabrigde Uinervtisy, it deosn't mttaer in waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht the frist and lsat ltteer be at the rghit pclae. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe.

ira-k

Hey you did your home-work......Looks pretty good, that will make a nice CPU loop...


You might want to add some shrouds with it...I'd have the fans in pull, the GTS has a pretty high fin per inch count and pull on thicker higher FPI rads seems to work best for me...Depends on how much heat your dumping in your loop to but shrouds will if nothing else make your rad more efficient ...


...Poll: Push or pull configuration for Radiators

...Part 1- Temp's with and with-out shrouds

...How To: Make any Sized shroud in 2 minutes

...How To: Build A Performance Shroud

...Shroud Build Guide (No 56k)

Some more stuff you might like to read and I'll leave you my cleaning and set-up PDF also....Just take your time setting up and leak test, leak test and leak test some more and you shouldn't have any problems at all...

...Assembling your Custom Watercooling Setup

...Water Cooling - In English

...Bleeding my WC setup..

...D-Tek Fuzion install tip! (Or why you should clean new blocks)

...PC Water Coolant Chemistry - Part I

...Cooling - An In-Depth Look

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

ChielScape

np. people here tend to be more D5 fanboys than DDC promoters.

__________________
Bigger = better, except for transistor size.
480GTX Club

Ross1308

Thanks Guys for all the replys, might get a bigger Rad, i would like to cool my GPU as well

__________________

Overclock.net PS3 Owner's Club
Join Teh Clubz I Haz Free Cookiez

ira-k

Yeah if you want to add a GPU to I would get a 360 rad...

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**