Skullzaflare

would anyone recommend these barbs? i have 2 of them here that are chromed
http://www.dangerden.com/store/produ...&cat=34&page=1

__________________

Quote:

Originally Posted by lemans81 No. Your going to continue to produce the same amount of heat whether or not your fans suck it all out. What that means is that your computer runs hotter, and that you will leak the hot air out more slowly. If you producing the heat it won't matter if you trap it in your case or exhaust it. Eventually its going to get out, your case isn't air tight.

ira-k

Yeah they are fine, there the 1/4" NPT right...Thats about all you used to be able to get...I liked their 9/16" ones for a little better flow, but just about everything has changed over to G1/4 now anyway...

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

dk8100

be careful cause it is really hard to get 1/4" tubing off of those once you get it on. I have a 1x1/2" to 4x1/4" block and i wanted to change tubing length to my 4 to 1 adapter and I couldn't. You basically have to cut the tubing off of the barbs. Maybe you could put petroleum jelly on the barbs to help, i have done that before but just make sure the tubing length is right if you use those. If you are only gonna use the 1/2" id you might be alright just check before you install.