DaveTaylor

I am currently looking into getting WC soon for my computer, I am using a Thermaltake Armor case

The problem is I don't know how to set up a loop etc for this case, I can mount outside and inside

If anyone could make me a simple diagram of where I could put:

Pump
Res.
Radiator
Cpu block
I am only doing a CPU loop at the moment, also I can mount the rad, ontop, The res can be also ontop or In a 5.25 bay, thank you in advanced

PS: http://www.thermaltake.com/product/C.../va8000bws.asp incase you want to see how the other fans are...

DaveTaylor

read through all the info great help, but I am still alittle confused could someone draw a few boxes on the picture etc with arrows so I can get the right idea please !

ira-k

I'd just use a bay res, put the pump in the bottom of your case and hang the rad on the back with a rad-box...


Block...Custom a Stinger....Stinger WB


Commercial a fuzion with a back-plate... FuZion CPU Block...Dtek FuZion Intel 775 Pro-Mount set.....You might want a nozzle kit for it to since your only running a CPU, they are kind of restrictive...Fuzion Nozzle Kit.....


Pump...D-5

Rad... GTX240 .I'd go with fans at least this size..86cfm Pana...These are what I use on my 480GTX..108cfm Sunon..115cfm Panaflo

Even with lower cfm fans its outperforming the PA...360 GTX Beats PA.3 Using 47cfm YL Fans

I'd use some shrouds on it to...Part 1- Temp's with and with-out shrouds

...How To: Make any Sized shroud in 2 minutes

Rad-box...Radbox

Res....DD 5 1/4" Bay Reservoir

Tubing....I like this its a little more compact then full 1/2" and will flow about as well...It fits the barbs tighter to...7/16x5/8"

Full 1/2x3/4"....1/2x3/4"

Stuff to read and I'll leave you my set-up and cleaning PDF also...

...Assembling your Custom Watercooling Setup - Overclock.net - Overclocking.net

...Water Cooling - In English

...D-Tek Fuzion install tip! (Or why you should clean new blocks)

...Poll: Push or pull configuration for Radiators

...PC Water Coolant Chemistry - Part I

...Cooling - An In-Depth Look

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

DaveTaylor

Thanks for the information, great help, But i am still abit confused, could someone draw a simple diagram using the picture above of parts and places, with a flow direction, would be so much easier for me !

ira-k

Well its not pretty...



Attachment 62829
click...

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

DaveTaylor

See it now

Edit: Is it bad to have warmed coolent from the CPU going into the res/fillport?