evil's GF rig build - Page 4 - Overclock.net

jbrown · 02-01-08

I'm looking at 220, it looks seperate.. what would I need to mount this? I have P180B so it allready has holes in back to run tubing..

Flower · 02-01-08

Quote:

Originally Posted by jbrown

I'm looking at 220, it looks seperate.. what would I need to mount this? I have P180B so it allready has holes in back to run tubing..

On the outside of your case like that? ^ source

Do you have a rear 120mm space?

jbrown · 02-01-08

I believe so...

Ok so I am ordering this now

the 220 model that is.. Prolly will upgrade next pay day.

ChielScape · 02-01-08

Quote:

Originally Posted by evil-98

a custom built system has a much high potential i would say. how much better depends on how you define better, you mean how much cooler? depend on how your comparing the two as well. a custom kit with good parts will be much better say my q6600 has a dtek 360gtx mcp655-v etc etc comes out to be something like $300 for that cooler, and i get a load difference from idle at 3.6 of 8-10c generally idles at 30c depending on the ambient of that day.

how much better is a custom kit depends on the situation. for my situation, i dont think i can get any better for $120

edit

@ChielScape: i could make the 220 internal! lol

no doubt you could.

evil-98 · 02-01-08

not a bad idea actually, probably wont need it tho. lol

jbrown · 02-01-08

Well I ordered 220

evil-98 · 02-01-08

good luck mate! pay attention to the inlet and outlet orientation if you rotate your base. i rotated the base so i could get the tubes downwards, so the inlet and outlet orientation changed to what it was previously labeled. you probably wont have an issue b/c your just running a single block, but i had 2 and didnt want to have my MCW30 to be the first in the loop. just keep in mind for future reference if you ever add blocks to your loop