auroraXP

How can I fit 3 of those in a v2100, or 2 of those and 1 PA120.2?

afzsom

Remove the HDD racks in the lower chamber (and place them in an EX-33A/EX-33B in a 5.25" bay) and use the lower chamber to house two of them (you will need to mod the side panels to get appropriate airflow. You can then stick the third one in the roof and cut the top panel to accommodate the fans/airflow up there.

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> D-Tek FuZion V1 -> MCW-60 -> MicroRes
Loop Cost: $395.03

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

auroraXP

Will it fit in the roof because I'm gonna have tri sli and an aftermarket soundcard. I'm cooling Cpu, all Gpu's, NB, SB, and Fet.. Loop 1 - Cpu Loop 2 - Gpu's Loop 3 - NB/SB, Fet Should I do PA12.2 for my loop 3? Every loop's gonna have D5 Vario and Micro Res. I don't want to interfere w/ my 5 1/4 drive bays so there are not 360 rads that I can fit 3 of in the bottom? If not I'll do 2 at bottom and 1 PA120.2 in top.. Thanks

afzsom

For the third radiator I'd then put it externally on a rad-box because of the Tri-SLi setup you're planning. It would fit with probably a regular SLi setup, but that third card and block will not give adequate space (I think).

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> D-Tek FuZion V1 -> MCW-60 -> MicroRes
Loop Cost: $395.03

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

auroraXP

3rd block and soundcard.. I really don't wanna have to mount externally. There is no possible way? No1's done it. I saw marcus000 with his Enigma triple loop.. Where'd he put his rads?

marcus000

Theres not a chance in hell you could fit TRI-SLI and a PA120.3 in the roof and I REALLY doubt you'd get normal SLI with a PA120.2 in the roof.



Have a glance here for how im about to do triple loops in a V2000:
http://www.watercoolinguk.co.uk/foru...pic.php?t=2317

__________________

afzsom

I believe the owner of Enigma changed his mind as is only doing a regular SLi setup (no third card), so there's extra space at the top. Plus that is in a Silverstone TJ07, not the V2000/2100 series.

Edit: Too slow Also marcus, how would the tubing be routed under there? Seems a bit tight, honestly. Air blowing into or out of the case in that setup?

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> D-Tek FuZion V1 -> MCW-60 -> MicroRes
Loop Cost: $395.03

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

marcus000

Yeh don't get me wrong it's deffo gonna be tight, probably end up having to use a couple of these roating fittings on some of the ports:



Also putting a 120.1 in the roof, top of the drive bays.

__________________

auroraXP

Thanks guys. Will I be able to fit tri sli and after market sound card? Should I do:
Loop1 - PA120.3 CPU (or with NB too, let me know best choice)
Loop2 - PA120.3 GPU's
Loop3 - PA120.1 NB,SB,FET

I'm also doing 3 hdd's. I like haveing my CD drive all the way at the top slot. I'm using a hdd expansion slot from LianLi and it'll be all the way at the bottom of the 5 1/4 slots. I think I'm going to do what you did in Supernova. All rads in bottom. Thanks for the help and let me know other ideas.

P.S. - I never actually got a straight answer on this from anyone yet. EK Supreme (CPU) or D-tek FuZion (CPU)?

CyberDruid

d-tek FuZion is the best CPU WB IMO.

__________________
I Build Custom Rigs and Work Acrylic. PM for details.... 25,291 3DMark06...21,908 Vantage...Join the Red Tide
Everything You Ever Wanted to Know About CyberDruid...Support Your Local Druid...Mod Supply Sale...Tech Station for Sale