By-Tor

All the pretty new parts came in this week, and when I got home from work today it was on.

Since I we last talked I had a small problem with both my OCLabs XP tops cracking and leaving my single 3 block loop running on a old DB-1 pump.

I'm now the proud owner of a 2 loop rig. I used the 5.5 Nozzle in the fuzion and have the MCP355 w/petra's top pumping it through a BIX 240 rad with maybe 4.5 feet of tubing.
So far I have noticed a 1-2c drop in idle temps. But want to load it up soon and see what she'll do.

The GPU loop has a MCP350 w/petra's top pushing through a BIX 360 and 5 feet of tubing.

I am using T-lines on both and have removed the Swiftech Micro Res.

Peace...

__________________
3D Mark 06: 22058
Super PI: 9.735 sec.

Intel Rig: Tech Station Toy
Gigabyte EP45-UD3P MB / Intel e8500 E0 @ 4.75 ghz on 500 FSB / 2 gigs Crucial Ballistix Tracers / Sapphire HD3870x2 / WD Raptor / D-Tek Fuzion V2 CPU block / MCP350 pump w/Petra's top / Micro-res. / BIX240 rad. w/151 CFM delta fans / 610 watt PSU

http://www.overclock.net/case-mod-wo...rk-spider.html

http://www.overclock.net/computer-ca...h-station.html

Martinm210

Nice!
Glad you got it all up and running again...good work!

__________________
Flow Rate Estimator | Radiator Sizing Estimators

By-Tor

Thanks Martin... That little DB-1 pump did its job once again while waiting on the pump and tops.

__________________
3D Mark 06: 22058
Super PI: 9.735 sec.

Intel Rig: Tech Station Toy
Gigabyte EP45-UD3P MB / Intel e8500 E0 @ 4.75 ghz on 500 FSB / 2 gigs Crucial Ballistix Tracers / Sapphire HD3870x2 / WD Raptor / D-Tek Fuzion V2 CPU block / MCP350 pump w/Petra's top / Micro-res. / BIX240 rad. w/151 CFM delta fans / 610 watt PSU

http://www.overclock.net/case-mod-wo...rk-spider.html

http://www.overclock.net/computer-ca...h-station.html