sublime0

hey guys. Im considering water cooling. I will be getting a $600 refund next month so I want to do water. Dont tell me to go intel either because it isnt going to happen. I love my sig rig and I want water.

Things I need. Im not sure about the video cards yet but that could be cool. I want to do CPU mainly.

I would prefer 1/2 tubes as well...

I dont want to spend an entire $600 just something that would work amazing for my rig at 3.6ghz 24/7 1.5-1.6vcore.

ira-k

I just made this for another guy...You don't need a back-plate for yours....And if you want a GPU I'd go with a Swifty 60 and ram sinks..Swifty 60...Swifty 60 Ram Sinks.


Something like this would work....

CPU...This for commercial. FuZion CPU Block..This for custom...Stinger WB.I use his all metal block and love them...
I'd use aback plate on either one...Dtek FuZion Intel 775 Pro-Mount set

Res..DD 5 1/4" Bay Reservoir.Or use a t-line....

Pump...D-5

Rad...240 for just a cpu....360 for cpu and gpu.... GTX360

Fans...86cfm Pana

Tubing...Use this on 1/2" barbs...7/16x5/8".This if you want full 1/2x3/4"...1/2x3/4"

Mix this with 40 or so ounces of distilled..Pentosin..Add a couple of drops of this for a biocide....PT Nuke

Take your time and do a little parts research now and find whats best for you...It may save you a couple of $$$...

Stuff to read, and be sure to read the stickies here also.Learn a little before you start..I'll leave you my cleaning ans set-up PDF also...


...Water Cooling - In English

...Assembling your Custom Watercooling Setup

...D-Tek Fuzion install tip! (Or why you should clean new blocks)

...Poll: Push or pull configuration for Radiators

...Part 1- Temp's with and with-out shrouds

...How To: Make any Sized shroud in 2 minutes

...How To: Build A Performance Shroud

...How To: Clean out a D-Tek Fuzion CPU Block

...D-Tek FuZion Washer Made Easy.

...PC Water Coolant Chemistry - Part I

...Cooling - An In-Depth Look Attached Files WC Cleaning and Set-Up.pdf (936.1 KB, 0 views)

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

By-Tor

Ira beat us to it... Enough said eh!!!

__________________
3D Mark 06= 21557

Intel Rig:
DFI DK x38-T2R MB, Intel e8500 E0 @ 4.5 ghz, 2 gigs Crucial Ballistix Tracers, 2 Visiontek 4870's xfired, WD Raptor, Thermaltake DuOrb VGA cooler, D-Tek Fuzion V2 CPU block, MCP350 pump w/Petra's top, Micro-res., BIX240 rad. w/151 CFM delta fans, 610 watt PSU

http://www.overclock.net/case-mod-wo...rk-spider.html

http://www.overclock.net/computer-ca...h-station.html