xtacized

hey overclockees, i've posted a thread here earlier last month, about me buying a triple slot radiator, apogee waterblock etc.. now i have a change in the things im gonna buy

Because everystore is like out of stock for "D-tek fuzion waterblock, and so on"
and i don't like waiting and so on..
I'm planning on buying this set.

http://www.newegg.com/Product/Produc...82E16835108076

If you're wondering why i'm going water cooling, is because i want to keep my CPU at 3.6 Ghz, without exceeding 62ºC under load


And if possible, if anyone can find a website with these following please post the website
"D-Tek fuzion, tubes, [50-60$ pump] dual slot radiator and Reservoir

Will +Rep, ty for help

__________________

21,430 on 3DMARK06
~Q6700 @ 4.1ghz, 2x 8800 GTS @ 814/1984/2154
http://service.futuremark.com/compare?3dm06=6825673

Q6700 @ 4.0 ghz // 1.536Vcore
http://s34.photobucket.com/albums/d1...on3dmark06.jpg

16 Year old overclocker competing with another 16 yr old (: *yes i bought all these component with my own money*


*Trading Q6700 (1.2875 VID) for Q6600 (1.22VID)*
Reason..? the vid on my Q6700 is high.

DaCrusader

maybe something like this? http://www.petrastechshop.com/pecoel.html

IMO thats the kit you want. Have a look around petras, they have alot of stock.

__________________

xdaseinx

There's really only a slight temp advantage with the fuzion unless you nozzle/washer it. I'd get the one from the egg; you'll get about the same performance for less $.

__________________

Xx_xBLADEx_xX

Jab-Tech.com is fast on there shipments, you can also try petra-tech.

D-Tek Fuzion at Jab-Techs
http://www.jab-tech.com/D-tek-FuZion...k-pr-3667.html

MasterKleer Tubing at Jab-Techs
http://www.jab-tech.com/Masterkleer-...D-pr-3079.html

Or Tygon
http://www.jab-tech.com/Tygon-R-3603...3-pr-3957.html

You want a 1/2" barb for less flow restrictions with 7/16 ID tubing this way its a nice tight fit.

The whole loop should include 1/2" barbs (Rad, Res, Water block) Plus go with a D5 Vario Pump. Good pump http://www.jab-tech.com/Swiftech-MCP...p-pr-2982.html

Buy now while Jab-Techs is in stock. Good luck.

__________________

xtacized

may i ask what's nozzle?

__________________

21,430 on 3DMARK06
~Q6700 @ 4.1ghz, 2x 8800 GTS @ 814/1984/2154
http://service.futuremark.com/compare?3dm06=6825673

Q6700 @ 4.0 ghz // 1.536Vcore
http://s34.photobucket.com/albums/d1...on3dmark06.jpg

16 Year old overclocker competing with another 16 yr old (: *yes i bought all these component with my own money*


*Trading Q6700 (1.2875 VID) for Q6600 (1.22VID)*
Reason..? the vid on my Q6700 is high.

ira-k

A nozzle is just a jet insert for the Fuzion, it makes them more restrictive, but at the same time it focus's the flow into the center of the IHS for better cooling....You would want to use the quad nozzle..D-Tek FuZion Accelerator Nozzle Kit.

A washer to seal the Fuzion so all the flow goes where it should is still a good idea, whether you use a jet or not....D-Tek FuZion Washer Made Easy. ..

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section**TEC Cooling Essential Threads

**E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

Sanad

Dtek block: http://cyberdruidpc.com/catalog/inde...4da46bd9e74bec