Going for Overkill, Need Advice - Overclock.net

h00chi3 · 04-13-08

I am going to run 2 MRC220's (in pull with deltas) in a single loop with my quad. So what would be the proper sequence in the series for this. I was thinking the following:

pump->rad->cpu->rad->res->

I know this is complete overkill but I want to do because I can.

Any help is appreciated and thanks in advance!

TonyL222 · 04-13-08

It wont make any appreciable difference IMHO. Do it which ever way is simplest and most straight forward to route.

h00chi3 · 04-13-08

The only reason I am doing this is because of a case mod I am working on, and will fit perfectly, I know it won't make that much of a difference but, I want to at least do it right.

xdaseinx · 04-13-08

As long as the cpu gets cold water from the rad immediately and the pump pulls directly after a res, it doesn't really matter. I would do both rads then to cpu.

Adrienspawn · 04-13-08

Lol this is EXACTLY what im doing but with 2 Black Ices.

Id think that you should have both Rads before the block. like this:

h00chi3 · 04-13-08

Quote:

Originally Posted by Adrienspawn

Lol this is EXACTLY what im doing but with 2 Black Ices.

Id think that you should have both Rads before the block. like this:

Most god aweful example and yet it works. I think this is going to be my new plan!

**ira-k** · 04-13-08

I'd stick them both before the chip to...Are you going to use the 3 blade Delta's? They have some really good pressure....If you ever get a chance to pick up a BIX or a Bonnie heater-core grab one, they love those high pressure fans..The Swifty are optimized for lower cfm fans, but more air and higher pressure still has to help some..

Let us know if it drops your temp's much, your already getting good temp's so it might not be a lot of gain, but any gain is good...

h00chi3 · 04-13-08

Yeah I got my hands on the 3 blade deltas, I will try it with those and then go to my 120x25 yate loons I got from Petras and see if there is a difference. I just wanted to try something new out, that is all. Thanks again everyone!

ChielScape · 04-14-08

if you're gonna buy a new case, get teh Lian li armorsuit PC-P80, it should mount the 480GTX rad internally.

also, overkill setup details here

trueg50 · 04-14-08

Quote:

Originally Posted by Adrienspawn

Lol this is EXACTLY what im doing but with 2 Black Ices.

Id think that you should have both Rads before the block. like this:

FYI your pump pumps th opposite way, thus your flow is going in the wrong direction. All you have to do is flip the pump, however that pump placement isn't terribly good.

		Overclock.net - Overclocking.net > Cooling > Water Cooling
Going for Overkill, Need Advice

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)