Ultrasonic2 (muffy)

great job thanks

__________________
Watercooling System
Radiators: 3x 240SGTS radiators in parallel to each other.
Fans: 6x Scythe ULTRA KAZE 120 x 38 mm fans sucking though a 7cm shroud
Pumps: 2x MCP655 pumps in series
RES: 80x400mm
Water Blocks:D-tek FuZion CPU (stock), Swiftech MCW60 GPU
Controller: M-Cubed T-balancer BigNG adjusts fan speeds and pump speeds to keep my system at X temp

CPU: INTEL 6600 GO
GPU ATI 4850
HD Six disks in RAID 0

razar

Awesome Martin! Any chance of having the time to do this with a Feser 360 as well?

I know you did some some flow rate testing on the 360 but I never saw any thermal testing data.

__________________
<---My little Mad scientist in training

Martinm210

I'm working on the TFC 480ER right now, but I don't have the 360 anymore, it was just a loaner for a quick pressure drop test. The 480 I get to keep though, so I'm putting it through the full meal deal..

So far the 480 is looking really favorable for ultra low through medium speed fans.

__________________
Flow Rate Estimator | Radiator Sizing Estimators

razar

ah ok....
So since the 480 and 360 are the same design just a different size it's probably safe to say the performance in general would be similar with the 480 being able to cool more components

__________________
<---My little Mad scientist in training

zooterboy

Honestly, I got my WC outfit more for silence than trying to lower temps all that far. As fast and as hot as I can get my CPU and my NB, I've still never gone over 63C even after 24 hours at 100% load. Since that's well below the threshold, I'm fine with it. The fans I have on the radiator are pretty high CFM for a low rpm, 120mm Scythe "Slip Stream" (68.54 CFM, 24 dBA @1200 RPM). I bet if I bought some cheap fans and used their housings as a cheap shroud, they would work even better. The point is, I can't hear my computer until I put my ear right up next to it. After years of running a stock cooled PIII with its chainsaw-like tone, I'm in heaven.

__________________

ira-k

I bet thats a nice one there...

__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section** TEC Guide:Basic Principles of TEC's

**E7200 @ 4141*9**5000BE @ 3510*10**LE 1600 @ 3500*10**150 Opty @ 3242*12**

Burn

Must be HUGE!

Thanks for the hard work Martin- I was wondering why you seemed to fall of the face of the forums

__________________
My CNC Mill Project
We cannot change the cards we are dealt, just how we play the hand.
--Randy Pausch

Tufelhunden

He is a testing guru!

Thanks for the hard work Martin!!!

__________________
Folding For The Cure and OCN under Tufelhunden

Martinm210

Yeah, the radiator testing is extremely time consuming. I can easily burn up 12-14 solid hours of logging temperatures over bits and pieces of time in the evening over a week just to do one.

I've also tested a few radiator prototypes that never made it to the "Public consumption" stage...oh well.

That and I've been putting ALOT of overtime in at work...just that time of year getting projects out the door.

__________________
Flow Rate Estimator | Radiator Sizing Estimators

razar

Martin.....let me say that you sir are a pillar of the community. Many of us watch your site and testing and respect what you do. You help the rest of us make up our minds and you help those who make products for us, make them better.

I THANK YOU.
+

__________________
<---My little Mad scientist in training