Betrivent

So I'm looking to get some WC. I'm thinking just a simple pump > triple rad > CPU > pump loop. Are these parts good?

I'm also not sure how I would go about adding a T-line in there.. Any advice? I'll be putting the radiator next to the case (as it'll be hard to mod my p182 to allow an internal triple rad).

Attached Thumbnails

 

__________________
nVidia Bios Flashing Guide

se7en56

Looks good. D-Tek is awesome, and so is that triple rad from swiftech. Yates are good too.

Should work well.

__________________

Betrivent

Excellent! But how should I add the t-line in?

__________________
nVidia Bios Flashing Guide

Betrivent

I just realised the Radiator has 1/4 fittings.. is that a problem since the rest ofm y loop is 1/2"?

__________________
nVidia Bios Flashing Guide

se7en56

You can buy bigger barbs for your rad probably...

To add the T line, before your pump so it is never starved for liquid.

__________________

GI_Manny

barbs are g1/4 thread. thats the standard for thread. see if it states the size somewhere else?

__________________
Currently Playing: Left 4 Dead, TF2, Fallout 3
xFire = gimanny

See my project: Xavier [Dark Tide]

ira-k

You have to have a t-line or res to fill and bleed your pump, put it right before the pump...

Like Manny said your barbs should be G1/4x1/2" for half inch tubing...


You can probably get by with that little pump, if you want top performance or think you might add another block later on get a D-5vario..D-5 Vario.You wont regret it..

EDIT: I'll leave you my cleaning and set-up PDF, be sure to read all the stickies here also, there is a lot of good info in them...

Attached Files

-wc-cleaning-set-up.pdf (935.1 KB, 7 views)

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

se7en56

Listen to ira-k

He knows everything about this

__________________