|
![]() |
Overclock.net - Overclocking.net > Cooling > Water Cooling | |
Q9450 =Custom Watercooling Suggestions?
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||
|
nVidia Enthusiast
Join Date: Jun 2008
Location: Los Angeles, CA USA
Posts: 127
Rep: 12
![]() Unique Rep: 11
Trader Rating: 0
|
Hello,
I have a Q9450 with a T.R.U.E at the moment and it is serving me well for my current overclock. I want to overclock higher, and to keep my temps low, i want to switch to water cooling. I don't wanna buy a thermaltake piece of **** watercooling system, i want to build my own. Can you watercooling veterans give me a few pointers on what to buy and from where? thanks in advance, Danny
__________________
Hey There ![]() 95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig. Quote:
http://www.blargkaboom.com/
|
|||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||
|
Intel Overclocker
|
DTek_Fuzion_V2
GTX360_Radiator although a GTX 240 may work as well for a lower wattage 45nm chip. I prefer overkill with cooling and I may add my video cards later and the 360 will come closer to being able to handle that. A MCR320 will work, especially if the budget is tight, but again I prefer overkill and the GTX 360 is just a better radiator.D5_Vario Tubing I prefer 7/16 for the tighter seal, others like the little better flow of 1/2 and the cool colors you can get. Scythe_Ultra_2000_FansThese are relatively quite, and on a controller you can make them almost silent. PT_Nuke_Biocide Pentosin_G11 or you can purchase it in a gallon form from a local VW dealership I use worm drives to clamp others prefer zipties. If you want to use zip ties, I suggest getting them from CyberDruid, he has some that are the best I have seen (never used) for tightening water hoses down. Think that about covers my suggestions. If I forgot anything I am sure someone else can add to or subtract from the list.
__________________
"You make fun of me because I'm different. I make fun of you because you're all the same." - old biker saying I'm a performance fanboy. ![]() ![]()
Last edited by Tufelhunden : 07-04-08 at 10:33 AM. |
|||||||||||
|
|
|
|
#3 (permalink) | ||||||||||||
|
New to Overclock.net
|
My 3 week old setup:
Q9450 DTek_Fuzion_V2 Enzotech Northbridge Swiftech D5 Pump 655-B 1/2 tubing tygon Thermochill PA120.3 with 3 adjustable fans (800-2600rpm) For my ram: http://www.mushkin.com/doc/products/...ail.asp?id=523 (2 gigs of it) for liquid i used something called "Iceland Coolant". I've overclocked my Q9450 to about 395*8=3160 and temps are around 47 load. I'm trying to goto 400 with the lowest vcore and without touching other settings... I chose thermochill instead of the gtx360 because at low fan speeds the thermochill performs better (from what i've read in the other topics). and i wanted the quietest system possible. where i am the thermochill was more expensive then the gt3260
__________________
Nzxt Nemesis (Black) CPU Validation
|
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|