psyxeon

3 x yate loons pull 1350, is it hot? Ambient temp is 25 to 29 c

Martinm210

No, not necessarily for that ambient temp, but keep an eye on where the radiator hot air is going. Could be recirculating back through the rad.

__________________
Flow Rate Estimator | Radiator Sizing Estimators

Danylu

Thats pretty good temps.

@ Martinm210: What is the VID on your Q6600?

__________________


My notes:
-If you ever ask a salesman for advice, you're asking which product has the higher margin/commission. Instead, ask someone who is morally obliged to give you accurate information and does not get monetary gains from doing so.
-If you claim something is unecessary, you're either jealous, a fanboy or both.
-Typin lyk dis donotz makez sum1 14, dis crapz is 4 dem 8 yr hc punkz!!!

Martinm210

1.3000

I made it to 3.3Ghz on 1.30Vcore, but it took a bit more each time the rest of the way to 3.6.

Currently set at 1.44 actual Vcore which droops to 1.42 under load and 100% stable for the last couple of weeks even with hotter summer temps. I hate instability so I generally overvolt a bit more for extra stability.

That's with my DFI, the old 680i wouldn't clock the chip over stock speeds at all.

__________________
Flow Rate Estimator | Radiator Sizing Estimators

Danylu

Thanks. I'm going to try 1.44v this week.

__________________


My notes:
-If you ever ask a salesman for advice, you're asking which product has the higher margin/commission. Instead, ask someone who is morally obliged to give you accurate information and does not get monetary gains from doing so.
-If you claim something is unecessary, you're either jealous, a fanboy or both.
-Typin lyk dis donotz makez sum1 14, dis crapz is 4 dem 8 yr hc punkz!!!

psyxeon

My vid is 1.352

I had to make a hard mod on the mobo to be able to hit 3.6 at a reasonable voltage



The thing is my temps are better on water, but just about 5 to 6 c

Here is the tr extreme pic and temps