sledgehammer1990

Hey, I have updated my list of items and I would like some feedback. I have a few questions actually. This will be a two loop system.

T Fitting X2

Tubing

Fittings

Fillport X2

Pump X2

UV Red

UV Blue

GTX 360 Radiator X1

GTX 240 Radiator X1

Fans X5

1.) Would a Y fitting be better or should I use a T fitting to have a fill port attached to the loop instead of a reservoir?

2.) Is the pump I have selected a Vario?

3.) How are the fans I have selected?

4.) How much tubing will I need to use in two loops? All internal radiators and components.

5.) Is there any other Orange coolant that anyone would be willing to recommend?

__________________

ira-k

Those are the right pumps...I'd use T's instead of Y's...Use a delrin filport instead of the aluminum, you don't want any aluminum in your loop period, you can have galvanic corrosion if you do...

..Dangerden Fillport - Delrin

I'd just use Masterkleer tubing, its a lot cheaper, I like it better then Tygon, I just change it every-time I clean my loop..7/16x5/8"...It fits the barbs tighter and is a little more compact then the full 1/2x3/4"..Use it on 1/2" barbs..You might want a few feet of Tygon if you have some really tight bends, it will bend just a tad better then MK...Get 20' or so at last....I usually buy it in bulk here.McMaster-Carr..

The fans are fine...Looks pretty good, use 2 or 3 zip-ties on each barb or automotive type clamps..Leak test, leak test again, and then when oyur really sick of leak testing do it some more....

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

tkl.hui

This coolant is kind of orange. Take a look.

http://www.ncix.com/products/index.p...ure=Primochill

__________________

sledgehammer1990

Thanks but I have decided to go with Red in the GPU loop for ATI and blue in the CPU loop for intel.

__________________