go4life

Hey! Is this any good? I wanted the fuzion, but it is out of stock..
Check the link out: CPU BLOCK

__________________

ira-k

There not a bad block, probably with-in a few C of a Fuzion...I think they have started making after-market mid-plates for them, so you can dial up or down the restrictiveness of the block to suit your needs...A CPU only loop can more afford a restrictive plate for better CPU cooling, where a multi block loop would be better off with a less restrictive mid-plate....I would use a decent pump like the D-5 vario with one for best results...

It probably wouldn't do to well with that T-Take pump, if thats what you are going to use...With one of those pumps I would get a Fuzion for sure, and not use any quad insert or jets in it, they would make it to restrictive for a pump like that...

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

go4life

Thanks for the reply!
I want to build a new wc setup, this TT is out for sale
I just bought the TT kit to get to know wc better, and now I know a lot more so I want a new one:P

I am thinking about the Swiftec MCP 355 pump, that is A LOT more powerfull

__________________

ira-k

They are a good pump to, I'd use a EK or XSPC top to get all out of it you can.. EK-DDC X-TOP...XSPC - Laing DDC Top..

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

go4life

yeah, but the thing is, it is a little hard to get good wc parts here in norway.. So I cant get those you showed me there

__________________

waqasr

Ive got the EK Supreme and it is a very nice block..also looks the Biz..But you do need a powerful pump for it as it is very restrictive..even then i still get decent temps on my quad at 3.6ghz 1.344v loaded with my DB1 pump (not the bets pump for a block like this ) load at 50,46,46,50. Heres some pics of the block for you man





Hey ira where can i get these modded plates from??..could i get a couple of plates thats are just plain, so that i can drill my own nozzles and stuff in them...i want to try one big hole about 7-8mm in diameter and loads of small nozzles like 2 mm wide.

__________________
SEX
Now that ive caught your attention please scroll up and ACTUALLY read my post
939 RIG : DFI Ultra D, Opty 165@2.7ghz, OCZ BH-5 Ram 1.5-2-2-0, BIG Typhoon.
17718 3DMARK 06 score with sig righttp://service.futuremark.com/compare?3dm06=6793718
My Xbox Gamertag is LiL WaKy, i challenge you to Halo3 and Forza 2!

ira-k

Heres one.. EK DDC Top..But if you are going to run 3/8" tubing and want to use the stock top it would still be a fine pump to use....

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

go4life

how is this block against the apogee gt? just wandering:P

__________________

ira-k

This is the only review that I know of off hand, and its the GT against the Fuzion...CPU Water Block Round Up APOGEE GT/GTX vs. STORM vs. FuZion vs. APOGEE vanilla ..Just don't get the Apogee GTX, it has a aluminum top in it and you can get galvanic corrosion using one....

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

go4life

alright, thanks! I thought the gtx was good?:/ well apparently not

__________________