VCheeZ

a. you must have hands like barbie to work in there

b. I cant believe i have never thought to take the case to the tub when emptying WC components. Aren't I the dumb smart guy.

__________________

eRazorzEDGE

lmao long and skinny

eRazorzEDGE

got new fans... panaflo 115cfm... LOUD



good thing i also got that fan controller now with 'em turned decently down, they still blow as much air as my old fans through my rad. i'm about 2 get up on some gamin 2 test out the effects

ira-k

You'll get used to them, turn them up a little each day...I've used mine so long they just have faded into a whit noise back ground type sound..I have to stop and listen for them..But I always have a TV or stereo going when I'm in here to, that helps...Crank them on up...

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

eRazorzEDGE

lol, maybe, i'm not brave enough yet *shudders*

heh, but on a different note, i dunno wth happened, but my mobo temp is reading 38°C when b4 it would only read a degree or 2 above the water temp. i don't know what i could have touched inside there 2 make it do that. i just ran extra wires through the back of the case 4 the fans from the controller... :/

ira-k

I don't know, looks like you would of had to hit the NB HSF pretty hard to knock its mount loose...

Or do you have a water block on the NB?...If you do just moving your tubing around a little can twist the little blocks loose..

Either way I'd just do a quick remount and see if thats the problem...

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

eRazorzEDGE

yeah, it's all water cooled, i'll check stuff :/

ira-k

Thats probably all it is then, you moved the tubing a little and it knocked it loose..You have ot watch your barbs when you move your tubing around to, they can back out a little on the threaded part and start slow leaking on you..

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

eRazorzEDGE

lol, actually, it was the fan that i took away from it... wierd too, cuz i have all heat sources on water. everything was still tight, so i stuck the fan back n the same spot, look toward the bottom and middle to right, there's a blue LED fan blowing 2 the back of the case...



now that it's back n there, the mobo temp is down 5°C to 33°C. i guess the temp sensor is on the outside of the mobo :/

ira-k

It must be, glad thats all it was...I have all kinds of fans hanging over my mobo, when you take away the HSF you have to replace that air flow on mobo components with something...

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**