ira-k

Is that rad out to ambient? What can you hold your BE at above ambient Prime loaded at? I was getting 12-14C loaded after an hour or so of large FFT's, but I had mine set up for TEC, so my CPU was right after a 30W heat dump from my Iwaki, if the rad had been before the CPU I bet I would of gotten a couple of C lower..That was with around a 1.5 v-core..

I filed down the top of this Intel IHS since its down for proofing, it was cupped, hopefully that will help a little..On plain WC'ing I was at 18C above ambient on load with a 1.367 v-core..Not to good, but it was cupped pretty badly to..Man my rad was packed with dust to, I've never let my rig get that bad before..

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

Danylu

Nice temps... now you need some top end hardware to go in so then you can really get some awesome overclocks.

__________________


My notes:
-If you ever ask a salesman for advice, you're asking which product has the higher margin/commission. Instead, ask someone who is morally obliged to give you accurate information and does not get monetary gains from doing so.
-If you claim something is unecessary, you're either jealous, a fanboy or both.
-Typin lyk dis donotz makez sum1 14, dis crapz is 4 dem 8 yr hc punkz!!!

Monst3r

i made it so now it goes pump>cpu>gpu>ram>sb>nb>mosfets>pump>rad>rad>res. unfortunately i'm experiencing slightly worse temps by running the rads 1 after the other like this. water temps have risen 1 degree with the same ambient's not 2 bad considering i still maintain a 4°C dT with my fans only at 1800rpm.

once i finally make my waterfall res and finish my rad box, it'll b complete... but not 4 a while.[/quote]

Dam overkill lol.. Ur rig looks crazy dude ur gonna shed some info now hey hey haha.. good job!

__________________

eRazorzEDGE

yea, that's the rad out 2 ambient delta. it's 14-16° above amibent loaded... when i use burnk7, it gets 2 about 16-18° above. heh, i put foam filters over my fans... i hate dust. i'm gonna try splitting my loop n 2 now, putting the cpu/gpu on 1 rad and the mobo/ram on the other. c what happens.

denebs, my friend... i can wait.

thx bro. what nfo u need?

ira-k

Thats not bad, what kind of v-core are you using?

I usually keep them blown out well with canned air in between cleanings, this time I ran out of canned air about a month ago and never got around to buying anymore...

Yeah keep all that on separate loops, I really don't like anything in my loop but my CPU..

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

eRazorzEDGE

well right now i'm at 1.30v @ 3.0Ghz... but those temps above were with it at 3.3GHz and 1.475v. even tho it wasn't completely stable at that speed during stress testing, it never BSOD'd while using the comp normally.

ira-k

I never could get mine completely stable over 3446, somewhere around there and about a 1.5 v-dimm..I could run 3500mhz Prime large stable for about 3 hours and it would quit, but I ran it at that and never locked it up just in normal use..Here in the near future I want to get a TEC on the BE, I think I can get quite a bit more out of it, I hope anyway.....

__________________
**Water Cooling Essential Threads**Relay Wiring **480 GTX-Temp's w/wo Shrouds **TEC Essential Threads

** E8600 @ 5.75Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**

eRazorzEDGE

lol, set some WR's ira!! woot


actually, after lookin n the cooling experiments section and c'ing that poor boy's ln2, i'm goin 2 get some dry ice 2day and try that. i'll b taking some temp readings and possibly throwing it n a cpu only loop... if i don't get back 4 a few weeks, u'll know y

eRazorzEDGE

yeah, so my cpu doesn't like freezing temps, so no go with the dry ice thing

but, i did decide 2 hook up my comp 2 my tv since i haven't done that n a while...



games do look nicer

MomijiTMO

How in the hell did you move your case and its cooling tower buddy? I don't think I have a chance in hell at lifting it lol.