Quote:
Originally Posted by Zaxbys
From what I have heard getting any water cooling parts from Thermaltake is a no no.
|
I'll agree with at least one part..
Thermaltake AquaBay Res
The fill port dips below the level of the top of the reservoir making filling extremely frustraiting. (overfills and spills even with a filler tube)
The single bay size makes filling take longer too as you have to fill the res, run the system a few seconds to get coolant into the lines, then stop and fill the res again.
At least with a dual-bay res you can fill it most of the way up and have coolant almost all the way through your system.
Just my opinion.
CPU
E7200 @ 3.75Ghz - 1.36 Vcore - 417FSB x 9.0m |
Motherboard
Gigabyte EP35-DS3L - 417 FSB |
Memory
4GB G.Skill Blue 1001Mhz 6-6-6-18 |
Graphics Card
EVGA 8800GT Akimbo Edition @ 800Mhz/1082Mhz |
Hard Drive
2x 320GB WD AAKS 1 Primary 1 Backup (Temporary) |
Sound Card
On Board Sound |
Power Supply
Apevia Beast 680watt |
Case
Apevia X-Plorer - Custom Digital Camo |
CPU cooling
Arctic Cooling Freezer 7 Pro - Lapped |
GPU cooling
EVGA Akimbo Integrated Cooler |
OS
Vista Home Premium 64-bit |
Monitor
22" Acer @ 1680 x 1050 |
Thoughts on this flow meter?
07-22-08
