whe3ls

Ok, i have some new stuff in the mail. A D tek Fuzion v1 and a Swiftech MCW60 coming to replace my block i have now and my stock heatsink on my GT. And i want to add another rad into this loop but i dont know if i should run it after the cpu or in series with my current rad?

__________________

Wickedjuggla

so you are wc ur gfx card......put it between ur cpu and gpu because the fluid coming from the cpu will be hotter and you can't cool something (gpu) with hot fluid

__________________

whe3ls

yep... it should hopefully running @ 815/2040/2200. thats what i was thinking. now i need to get another rad

__________________

Admiral Doom

Definately in between CPU and GFX!

__________________
92% of teens have moved on to rap. If you are part of the 8% who still listen to real music, copy and paste this.

NVIDIA

jNSK

If you're going to WC the graphics card it's better to put it on a seperate loop. You don't want the heat from the CPU to go through the GPU aswell, afterall.

But if you wanted to keep it on the same loop, I'd put it after the GPU and before the CPU. GPU's produce more heat so you'll want to remove that before going on to cool the CPU.

whe3ls

well that the point of putting a rad between the two.

__________________

Wickedjuggla

run it............pump.....main rad.....gpu......second rad.....cpu.......rez...back to pump....wouldn't want pump heat affecting temps...

__________________

whe3ls

my pump runs cool. im going to run it rad1 cpu rad2 gpu pump rad1

__________________

Wickedjuggla

same essentially you have a rad inbeen very component except the rez and pump

__________________

whe3ls

ya. i forgot my tline owell

__________________