|
![]() |
Overclock.net - Overclocking.net > Cooling > Water Cooling | |
Redid my Loop, MUCH nicer and easier to manage!
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||
|
Intel Overclocker
|
http://img168.imageshack.us/img168/4512/0000006wb7.jpg
I got tired of the Lowes tubing. It was much too rigid and hard to maneuver so I got some 7/16 masterkleer to replace it. I ditched the cold cathodes and also got better fans for my rad. Mounted the rad box and will tidy the rest up later. Here's the original setup threads: http://www.overclock.net/new-members...new-forum.html http://www.overclock.net/water-cooli...adventure.html
__________________
http://heatware.com/eval.php?id=174
Last edited by gillbot : 07-19-08 at 06:05 PM. |
|||||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
New to Overclock.net
|
ooo nice
__________________I also redid my loop recently and i managed to get 4C lower temps after that ![]() nice job
|
|||||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||
|
Intel Overclocker
|
thanks!
I planned on redoing it, I just let it run longer than expected. I'm gonna redo this one to add my chipset cooler and maybe the Koolance PCI pass through also. I have a Dtek fuzion waiting here as well!
__________________
http://heatware.com/eval.php?id=174
|
|||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||
|
AMD Overclocker
|
It still looks way to busy using 1/2" ID tubing. I'm running 3/8" ID tubing with room to view vs. room to spare.
Are you mounting the radbox on the rear of the case too?
__________________
Support Your Local Sheriff - At high noon If I ever had a transaction with you, please fill out my heatware!
|
|||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||
|
Intel Overclocker
|
radbox goes on the side. I left the lines a little long on purpose as I still have some tweaking to do for my chipset cooler and Dtek when they go in.
__________________
http://heatware.com/eval.php?id=174
|
|||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||||
|
Habitual Tinkerer
![]() |
Looking good..Thanks for the pic's..
..Did it help your temp's any?
__________________
**Water Cooling Essential Threads** Overclock.net's Downloads Section** TEC Guide:Basic Principles of TEC's **E8600 @ 5.3Ghz 10x **E7200 @ 4.5Ghz 9x **5000BE @ 3.5Ghz 10x**150 Opty @ 3.2Ghz 12x**
|
|||||||||||
|
|
|
|
#7 (permalink) | |||||||||||
|
Intel Overclocker
|
No idea, I changed so many things it's hard to say. I went to a higher flowing fan and also changed CPU's.
__________________
http://heatware.com/eval.php?id=174
|
|||||||||||
|
|
|
|
|
#8 (permalink) | |||||||||||
|
Intel Overclocker
|
Well, so far so good! Max temp is 54C full load in prime with my E8500 @ 4.25GHz!! I think these new fans helped the most.
__________________
http://heatware.com/eval.php?id=174
|
|||||||||||
|
|
|
|
|
#9 (permalink) | |||||||||||
|
Intel Overclocker
|
__________________
http://heatware.com/eval.php?id=174
|
|||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|